Konica Minolta bizhub C35P Service Manual page 102

Field Service Ver. 1.0 May 2010
[4]
[3]
[1]
6. To reinstall, reverse the order of removal.
4. Remove the E-ring [1] and bushing
NOTE
• Before removing the holder [3],
[2]
[1]
A0VDF2C049DA
5. Remove the loop detection clutch [1].
A0VDF2C050DA
7. OTHER MAINTENANCE ITEM
[2], and remove the holder [3].
attach tape or similar material [4] to
the section shown in the illustration
to prevent the shaft from falling
down and being lost.
67