Firmware Rewriting; Checking The Current Firmware Version; Firmware Upgrading Procedure By Usb Memory Device; Preparations For Firmware Rewriting - Konica Minolta bizhub C35P Service Manual

Field Service Ver. 1.0 May 2010
6.

FIRMWARE REWRITING

6.1

Checking the current firmware version

1. Display [SERVICE MENU].
2. Display [FIRMWARE VERSION].
3. Select the firmware to be updated and check the current version.
See P.101
6.2

Firmware upgrading procedure by USB memory device

6.2.1

Preparations for firmware rewriting

A. System requirements
• PC equipped with a USB port
• USB memory device
B. Saving the firmware data into the USB memory device
1. Save the firmware data in appropriate space in the PC.
2. Connect the USB memory device to the PC.
3. Create a "firmware" folder immediately under the drive of the USB memory device.
4. Copy the firmware data (***.exe) in the firmware folder created in step 3.
NOTE
• Be sure to save the firmware data in "drive:/firmware/***.exe."
• The printer can display up to 20 files of firmware data during upgrading.
FIRMWARE VERSION
CONTROLLER F/W
ENGINE F/W
BOOT F/W
6. FIRMWARE REWRITING
A0VDF2E548DA
A121F2E554DA
23