Page 1: Reference Guide
C35P Reference Guide A0VD-9582-12A...
Page 2: Copyright Notice
KONICA MINOLTA. The information contained in this guide is intended for use with the KONICA MINOLTA bizhub C35P printers only.
Page 3: Software License Agreement
SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technolo- gies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Programs”), other software which runs on a computer system for use in conjunction with the...
Page 4: About Adobe Color Profile
11. Notice to Government End Users: The Software is a “commercial item,” as that term is defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consis- tent with 48 C.F.R.
Page 5 4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis. Adobe makes no representation as to the adequacy of the Software for any particular pur- pose or to produce any particular result. Adobe shall not be liable for loss or damage aris- ing out of this Agreement or from the distribution or use of the Software or any other materials.
Page 6 9. GOVERNING LAW This Agreement will be governed by and construed in accordance with the substantive laws in force in the State of California as such laws are applied to agree- ments entered into and to be performed entirely within California between California resi- dents.
Page 7: Dic Standard Color Profile License Agreement
5. All company names and product names used in this document is the trademarks or regis- tered trademarks of their respective holder. This ICC Profile made by GretagMacbeth ProfileMaker and granted TOYO INK certain license to distribute by GretagMacbeth AG. TOYO Offset Coated 2.1 ©...
Page 8 4. License Method and Restrictions a. You may install and use the Profile on a single desktop computer; provided, however, that, notwithstanding anything contrary contained herein, you may not use the Profile on any network system or share, install or use the Profile concurrently on different computers, or electronically transfer the Profile from one computer to another or over a network.
Page 9: Openssl Statement
7. General a. This License Agreement shall be governed and construed in accordance with the laws of Japan, without giving effect to principles of conflict of laws. If any provision of this License Agreement shall be held by a court of competent jurisdiction to be contrary to law, that pro- vision will be enforced to the maximum extent permissible, and the remaining provisions of this License Agreement will remain in full force and effect.
Page 10: Original Ssleay License
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)” THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE ARE DISCLAIMED.
Page 11 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This product includes software written by Tim Hudson (tjh@cryptsoft.com)” THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Page 12: Netsnmp License
NetSNMP License Part 1: CMU/UCD copyright notice: (BSD like) Copyright 1989, 1991, 1992 by Carnegie Mellon University Derivative Work - 1996, 1998-2000 Copyright 1996, 1998-2000 The Regents of the University of California All Rights Reserved Permission to use, copy, modify and distribute this software and its documentation for any pur- pose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting doc- umentation, and that the name of CMU and The Regents of the University of California not be...
Page 13 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of condi- tions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of condi- tions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 14 OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABIL- ITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Part 5: Sparta, Inc copyright notice (BSD) Copyright ©...
Page 15 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU- LAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEM- PLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 16 WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of FundsXpress.
Page 17 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of condi- tions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 18: Wpa Supplicant
This file is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, to the extent permitted by law; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. WPA Supplicant Copyright © 2003-2005, Jouni Malinen <jkmaline@cc.hut.fi> and contributors All Rights Reserved.
Page 19: Table Of Contents
Contents 1 Operation on Mac OS X ................. 1-1 System Requirements for the Printer Driver ..........1-2 Installing the Printer Driver ................1-3 Installing the Printer Driver................1-3 Uninstalling the printer driver ..............1-8 For Mac OS X 10.2 ..................1-8 For Mac OS X 10.3/10.4 ................
Page 20 Rendezvous Setting................1-29 IP Printing Setting ................1-30 Printer Setup Utility Settings (Mac OS X 10.4) .......... 1-34 When Using a USB Connection ..............1-34 When Using a Network Connection ............1-36 Bonjour Setting ................... 1-36 AppleTalk Setting................1-38 IP Printing Setting ................1-41 Printer Settings (Mac OS X 10.5/10.6) ............
Page 21 Cover Page ....................1-91 Scheduler ....................1-92 Color Options .................... 1-93 Advanced Color Options/Image ..............1-94 Advanced Color Options/Text ..............1-95 Advanced Color Options/Graphics............1-97 Advanced Color Options/Simulation ............1-98 Printer Features ..................1-99 Supply Levels..................1-100 Summary....................1-101 Specifying the Color Profile ..............1-102 Preparation....................
Page 22 4 Printer Utilities ....................4-1 Installing Printer Utilities on Windows ............4-2 5 Understanding the Ethernet Configuration Menus ........5-1 Ethernet Menu ....................5-2 Location within the Configuration Menu ............5-2 Accessing the Ethernet Menu ..............5-4 Using the Network Menu Options ............... 5-5 TCP/IP ....................
Page 23 Adding an IPP Port using Add Printer Wizard - Windows Server 2003/XP/2000 ............6-16 Adding an IPP Port using Add Printer Wizard - Windows 7/Vista/Server 2008 R2/Server 2008........6-21 Printing via Web Service Print Function............ 6-25 With Windows Server 2008 R2/Server 2008 ........6-25 Adding a printer from the Network window - Windows 7/Server 2008 R2 ..............
Page 24 Done Job List (Detail) ................. 7-30 Print Page ....................7-31 Default Settings................... 7-31 Font/Form ................... 7-42 Report Types ..................7-46 Direct Print ..................7-47 Configuring the Printer ................7-48 System Page..................... 7-48 Device Information ................7-49 Counter ....................7-58 Online Assistance ................7-59 Import/Export ..................
Page 25 Encryption Strength Setting .............. 7-168 Remove a Certificate ................ 7-169 Mode Using SSL/TLS ............... 7-170 Authentication ................... 7-171 A Appendix ......................A-1 x-24 Contents...
Page 26: Operation On Mac Os X
Operation on Mac OS X...
Page 27: System Requirements For The Printer Driver
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the fol- lowing system requirements. Computer Apple Macintosh computer installed with the following processor: - PowerPC G3 or later processor (PowerPC G4 or later is recommended) - Intel processor Connecting the computer USB connection, Network connection...
Page 28: Installing The Printer Driver
Installing the Printer Driver You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications. Installing the Printer Driver The procedure for installing the printer driver on Mac OS X 10.5 is described below.
Page 29 Click Continue. Click Continue. Installing the Printer Driver...
Page 30 Click Continue. Click Agree in the confirmation dialog box if you agree to the terms of the license. Installing the Printer Driver...
Page 31 Click Install in the Standard Install page. Enter the administrator user name and password in the Authenticate dia- log box, and then click OK. Installation starts. Installing the Printer Driver...
Page 32 After the installation has been completed, click Close. This completes the installation of the printer driver. Installing the Printer Driver...
Page 33: Uninstalling The Printer Driver
KONICA MINOLTA bizhub C35P.gz Delete the unnecessary files from Library - Printers. – Drag the KONICA MINOLTA bizhub C35P Color.plugin file, which is located in Library - Printers - PPD Plugins, to the Trash icon. – Drag the pstobzC35PPS file, which is located in Library - Printers - KONICAMINOLTA - filter, to the Trash icon.
Page 34 Delete the unnecessary files from Library - Printers. – Drag the KONICA MINOLTA bizhub C35P Color.plugin file, which is located in Library - Printers - KONICAMINOLTA - PDEs, to the Trash icon. – Drag the pstobzC35PPS file, which is located in Library - Printers - KONICAMINOLTA - filter, to the Trash icon.
Page 35: Print Center Settings (Mac Os X 10.2.8)
In the Printer List, click Add. Select bizhub C35P in the Product list. If bizhub C35P does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Select KONICA MINOLTA from the Printer Model pop-up menu.
Page 36: When Using A Network Connection
Select KONICA MINOLTA bizhub C35P PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-59. When Using a Network Connection...
Page 37 Click Add in the Printer List. Select AppleTalk from the pop-up menu. Select BHC35P-xxxxxx. "XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). Select KONICA MINOLTA from the Printer Model pop-up menu. 1-12 Print Center Settings (Mac OS X 10.2.8)
Page 38: Rendezvous Setting
Select KONICA MINOLTA bizhub C35P PPD in the Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-59. Rendezvous Setting Connect the printer to an Ethernet network.
Page 39 Select Rendezvous from the pop-up menu. Select KONICA MINOLTA bizhub C35P(xx:xx:xx). "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal). Select KONICA MINOLTA from the Printer Model pop-up menu. 1-14 Print Center Settings (Mac OS X 10.2.8)
Page 40 Select KONICA MINOLTA bizhub C35P PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-59. Print Center Settings (Mac OS X 10.2.8)
Page 41: Ip Printing Setting
IP Printing Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. Select IP Printing from the pop-up menu. 1-16 Print Center Settings (Mac OS X 10.2.8)
Page 42 Enter the IP address for the printer in the Printer's Address text box. Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C35P PPD in the Model Name list. Print Center Settings (Mac OS X 10.2.8)
Page 43: Ipp Setting
Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-59. IPP Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 44 Select Advanced from the pop-up menu. Select Internet Printing Protocol (http) from the Device pop-up menu. Enter the name for the printer in the Device Name text box. Print Center Settings (Mac OS X 10.2.8) 1-19...
Page 45 In the Device URI text box, enter "http://<IP address>/ipp". Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C35P PPD in the Name list. 1-20 Print Center Settings (Mac OS X 10.2.8)
Page 46: Specifying Port 9100
Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-59. Specifying Port 9100 Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 47 Select Advanced from the pop-up menu. Select AppSocket/HP JetDirect from the Device pop-up menu. Enter the name for the printer in the Device Name text box. 1-22 Print Center Settings (Mac OS X 10.2.8)
Page 48 In the Device URI text box, enter "socket://<IP address>". Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C35P PPD in the Name list. Print Center Settings (Mac OS X 10.2.8) 1-23...
Page 49 Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-59. 1-24 Print Center Settings (Mac OS X 10.2.8)
Page 50: Printer Setup Utility Settings (Mac Os X 10.3)
Printer Setup Utility Settings (Mac OS X 10.3) When Using a USB Connection Use a USB cable to connect the printer to your computer. Check that the printer is turned on, and then restart the computer. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 51 Select bizhub C35P in the Product list. If bizhub C35P does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA bizhub C35P PPD is selected in the Printer Model list.
Page 52: When Using A Network Connection
When Using a Network Connection The network connection settings can be specified IP printing Setting (IPP, LPD or Socket). AppleTalk Setting Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List.
Page 53 "XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C35P PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen.
Page 54: Rendezvous Setting
Disk, then Applications, then Utilities. Click Add in the Printer List. Select Rendezvous from the pop-up menu. Select KONICA MINOLTA bizhub C35P(xx:xx:xx) in the Name list. "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal).
Page 55: Ip Printing Setting
Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C35P PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options”...
Page 56 Click Add in the Printer List. Select IP Printing from the pop-up menu. Select desired print protocol from the Printer Type pop-up menu. - For an LPD setup, select LPD/LPR. - For an IPP setup, select Internet Printing Protocol. - For a port 9100 setup, select Socket/HP Jet Direct. Printer Setup Utility Settings (Mac OS X 10.3) 1-31...
Page 57 Enter the IP address for the machine in the Printer Address text box. Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C35P PPD in the Model Name list. Click Add. 1-32 Printer Setup Utility Settings (Mac OS X 10.3)
Page 58 The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-59. Printer Setup Utility Settings (Mac OS X 10.3) 1-33...
Page 59: Printer Setup Utility Settings (Mac Os X 10.4)
Printer Setup Utility Settings (Mac OS X 10.4) When Using a USB Connection Use a USB cable to connect the machine to your computer. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. In the Printer List, click Add.
Page 60 Select bizhub C35P in the Printer Name. If bizhub C35P does not appear, check that the machine is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA bizhub C35P PPD is selected in the Print Using list.
Page 61: When Using A Network Connection
When Using a Network Connection The network connection settings can be specified in one of three ways: Bonjour Setting, AppleTalk setting and IP printing Setting (IPP, LPD or Socket). Bonjour Setting Connect the machine to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 62 Select KONICA MINOLTA bizhub C35P(xx:xx:xx) in the Printer Browser. “xx:xx:xx” refers to the last six digits of the MAC address (in hexa- decimal). Check that KONICA MINOLTA bizhub C35P PPD is selected in the Print Using list. Click Add. Printer Setup Utility Settings (Mac OS X 10.4)
Page 63: Appletalk Setting
Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit and Duplex Unit according to your printer setup. Click Continue. The new printer appears in the Printer List screen. AppleTalk Setting Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 64 In the Printer List, click Add. The detected printer appears in the Printer Browser. Select BHC35P-xxxxxx in the Printer Browser. Printer Setup Utility Settings (Mac OS X 10.4) 1-39...
Page 65 "XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). Check that KONICA MINOLTA bizhub C35P PPD is selected in the Print Using list. Click Add. The new printer appears in the Printer List screen. 1-40...
Page 66: Ip Printing Setting
IP Printing Setting Connect the machine to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. Click IP Printer. Printer Setup Utility Settings (Mac OS X 10.4) 1-41...
Page 67 Select desired print protocol from the Protocol pop-up menu. - For an IPP setup, select Internet Printing Protocol - IPP. - For an LPD setup, select Line Printer Daemon - LPD. - For a port 9100 setup, select HP Jet Direct - Socket. 1-42 Printer Setup Utility Settings (Mac OS X 10.4)
Page 68 Enter the IP address for the machine in the Address text box. - For an IPP setup, "ipp" in the Queue text box. Check that KONICA MINOLTA bizhub C35P PPD is selected in the Print Using list. Click Add. Printer Setup Utility Settings (Mac OS X 10.4)
Page 69 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit and Duplex Unit according to your printer setup. Click Continue. The new printer appears in the Printer List screen. 1-44 Printer Setup Utility Settings (Mac OS X 10.4)
Page 70: Printer Settings (Mac Os X 10.5/10.6)
Printer Settings (Mac OS X 10.5/10.6) When Using a USB Connection Use a USB cable to connect the printer to your computer. Select System Preferences from the Apple menu. Click Print & Fax. In the Print & Fax, click + button. Printer Settings (Mac OS X 10.5/10.6) 1-45...
Page 71 The detected printer appears in the Printer Browser. Select KONICA MINOLTA bizhub C35P in the Printer Name list. 1-46 Printer Settings (Mac OS X 10.5/10.6)
Page 72 If KONICA MINOLTA bizhub C35P does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA bizhub C35P PPD is selected in the Print Using list. Click Add.
Page 73 Click Continue. The new printer appears in the Print & Fax screen. 1-48 Printer Settings (Mac OS X 10.5/10.6)
Page 74: When Using A Network Connection
When Using a Network Connection The network connection settings can be specified in one of three ways: Bon- jour Setting, AppleTalk setting and IP printing setting (IPP, LPD or Socket). Bonjour Setting Connect the machine to an Ethernet network. Select System Preferences from the Apple menu. Click Print &...
Page 75 The detected printer appears in the Printer Browser. Select KONICA MINOLTA bizhub C35P(xx:xx:xx) in the Printer Name list. “xx:xx:xx” refers to the last six digits of the MAC address (in hexadeci- mal). 1-50 Printer Settings (Mac OS X 10.5/10.6)
Page 76 Check that KONICA MINOLTA bizhub C35P PPD is selected in the Print Using list. Click Add. Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit and Duplex Unit according to your printer setup. Click Continue. The new printer appears in the Print & Fax screen.
Page 77: Appletalk Setting
AppleTalk Setting Mac OS X 10.6 does not support AppleTalk. Connect the machine to an Ethernet network. Select System Preferences from the Apple menu. Click Print & Fax. In the Print & Fax, click + button. 1-52 Printer Settings (Mac OS X 10.5/10.6)
Page 78 Select BHC35P-xxxxxx in the Printer Name list. "XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). Check that KONICA MINOLTA bizhub C35P PPD is selected in the Print Using list. Click Add. Printer Settings (Mac OS X 10.5/10.6)
Page 79 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit and Duplex Unit according to your printer setup. Click Continue. The new printer appears in the Print & Fax screen. 1-54 Printer Settings (Mac OS X 10.5/10.6)
Page 80: Ip Printing Setting
IP Printing Setting Connect the machine to an Ethernet network. Select System Preferences from the Apple menu. Click Print & Fax. In the Print & Fax, click + button. Printer Settings (Mac OS X 10.5/10.6) 1-55...
Page 81 Click IP. Select desired print protocol from the Protocol pop-up menu. - For an IPP setup, select Internet Printing Protocol - IPP. - For an LPD setup, select Line Printer Daemon - LPD. - For a port 9100 setup, select HP Jetdirect - Socket. 1-56 Printer Settings (Mac OS X 10.5/10.6)
Page 82 Enter the IP address for the machine in the Address text box. - For an IPP setup, "ipp" in the Queue text box. Check that KONICA MINOLTA bizhub C35P PPD is selected in the Print Using list. Click Add. Printer Settings (Mac OS X 10.5/10.6)
Page 83 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit and Duplex Unit according to your printer setup. Click Continue. The new printer appears in the Print & Fax screen. 1-58 Printer Settings (Mac OS X 10.5/10.6)
Page 84: Selecting Print Options
Selecting Print Options For Mac OS X 10.2/10.3/10.4 Open Printer Setup Utility (Print Center), which can be accessed by clicking Startup disk, then Applications, then Utilities. Select this printer in the Printer List, and then select Show Info from the Printers menu.
Page 85 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit and Duplex Unit according to your printer setup. Click Apply Changes. Close the Printer Info dialog box. 1-60 Selecting Print Options...
Page 86: For Mac Os X 10.5/10.6
For Mac OS X 10.5/10.6 Select System Preferences from the Apple menu. Click Print & Fax. Select this printer in the Printers List, and then click Options & Sup- plies. Select Driver tab. Selecting Print Options 1-61...
Page 87 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit and Duplex Unit according to your printer setup. Click OK. Close the Print & Fax screen. 1-62 Selecting Print Options...
Page 88: Specifying Page Setup Settings (Mac Os X 10.2/10.3/10.4/10.5/10.6)
Specifying Page Setup Settings (Mac OS X 10.2/10.3/10.4/10.5/10.6) The following dialog box appears when Page Setup... is selected from the File menu in the application being used. Select Page Setup... from the File menu. The Page Setup dialog box appears. Select this printer in the Format for pop-up menu.
Page 89: Page Attributes Options
Page Attributes Options The Page Attributes section is used to specify the settings for the paper size, scaling, and print orientation. Paper Size Select the desired paper size from the Paper Size pop-up menu. Orientation Select either a vertical or horizontal page orientation for printouts. Scale If you want to enlarge or reduce the size of the printout, enter the scale ratio here (25-400%).
Page 90: Specifying Custom Paper Size
Specifying Custom Paper Size You can also specify a paper size that is not listed in the Paper Size pop-up menu. Select Manage Custom Sizes from the pop-up menu, in the Page Setup dialog box. The Custom Page Sizes dialog box appears. Click this button to create a new custom page size.
Page 91 After you have finished entering the settings, click OK. Regardless of which paper is selected, the printer does not print within 0.165" (4.2 mm) of the edge of the paper. 1-66 Specifying Page Setup Settings (Mac OS X 10.2/10.3/10.4/10.5/10.6)
Page 92: Specifying Print Settings (Mac Os X 10.4)
Specifying Print Settings (Mac OS X 10.4) The following dialog box appears when Print... is selected from the File menu in the application being used. Select Print... from the File menu. The Print dialog box appears. Select this printer in the Printer pop-up menu. The Print dialog box is used to specify the following print options.
Page 93: Common Buttons
Section Description Color Options This section contains options for color print- ing. Printer Features This section contains options for specifying paper type and resolution settings. Supply Levels This section provides information for check- ing the amount of service life remaining on each consumable.
Page 94: Copies & Pages
Copies & Pages The Copies & Pages section is used to specify the number of copies to print and the range of pages to print. Copies This specifies the number of copies to be printed. If the Collated check- box is selected, all pages in the documents are printed as sets of print- outs.
Page 95: Layout
Layout The Layout section is used to specify the page layout when printing and the setting for double-sided printing. Pages per Sheet Specifies the number of pages to be printed on one sheet of paper. For example, if 2 is selected, two pages are printed on one sheet of paper. Layout Direction If you are printing more than one page per sheet, this specifies the direc- tion and order the pages should be arranged on each sheet of paper.
Page 96: Scheduler
Scheduler The Scheduler section is used to specify the timing and priority for printing jobs. Print Document Now: Select this option to begin printing immediately. Specify the time to begin printing. On Hold: Select this option to hold the print job. Priority Select the priority for printing jobs that are being held.
Page 97: Paper Handling
Paper Handling The Paper Handling section is used to specify the pages that are to be printed and the order in which the pages are printed. Page Order Automatic: Select this option to print in the original page order of the document.
Page 98: Colorsync
ColorSync Color Conversion Allows you to select host-based color matching or printer-based color matching. Quartz Filter Allows you to select Quartz Filter. Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type.
Page 99: Error Handling
Error Handling PostScript Errors Allows you to select whether or not a report is outputted when a Post- Script error occurs. Tray Switching This feature is not available with this printer. 1-74 Specifying Print Settings (Mac OS X 10.4)
Page 100: Paper Feed
Paper Feed The Paper Feed section is used to specify the paper feed setting. All pages from All pages in the document are printed using the paper in the specified paper tray. First page from The first page of the document is printed on paper from a paper tray differ- ent from the tray used to print the rest of the document.
Page 101: Color Options
Color Options Quick Color Allows you to select a color preset. Brightness Allows you to set Brightness. Color as Grayscale Allows you to set Grayscale color. Color Separation Allows you to set Color Separation. Economy Print Allows you to set Economy Print Mode. Edge Strength Allows you to select Edge Strength.
Page 102: Advanced Color Options/Image
If Text/Figure is selected, superimposed printing is applied to text and graphics. If Text is selected, superimposed printing is applied to text. Advanced Color Options Click this button to display the Advanced Color Options pane. This button enables when Custom is selected under Quick Color. Advanced Color Options/Image RGB Source Allows you to select RGB color profiles for images.
Page 103: Advanced Color Options/Text
Options pane, Download Manager must be copied into the folder at the path Applications/Download Manager bizhub C35P. After creat- ing the folder Download Manager bizhub C35P in the Applications folder, copy Download manager into the created folder. Advanced Color Options/Text RGB Source Allows you to select RGB color profiles for text.
Page 104 Options pane, Download Manager must be copied into the folder at the path Applications/Download Manager bizhub C35P. After creat- ing the folder Download Manager bizhub C35P in the Applications folder, copy Download manager into the created folder. Specifying Print Settings (Mac OS X 10.4)
Page 105: Advanced Color Options/Graphics
Advanced Color Options/Graphics RGB Source Allows you to select RGB color profiles for graphics. RGB Intent Allows you to select color intent for RGB graphics. RGB Gray Treatment Allows you to select RGB gray treatment for graphics. Destination Profile Allows you to select Destination Profile for graphics. Halftone Allows you to select halftone for graphics.
Page 106: Advanced Color Options/Simulation
Options pane, Download Manager must be copied into the folder at the path Applications/Download Manager bizhub C35P. After creat- ing the folder Download Manager bizhub C35P in the Applications folder, copy Download manager into the created folder. Advanced Color Options/Simulation Simulation Profile Allows you to select color profiles for simulation.
Page 107: Printer Features
In order to start up Download Manager from the Advanced Color Options pane, Download Manager must be copied into the folder at the path Applications/Download Manager bizhub C35P. After creat- ing the folder Download Manager bizhub C35P in the Applications folder, copy Download manager into the created folder. Printer Features...
Page 108: Supply Levels
Supply Levels The Supply Levels section provides information for checking the amount of service life remaining on each consumable. The Supply Levels section appears when a printer is created on Mac OS X 10.4 with a Bonjour, IPP, LPD, Socket connection. The Supply Levels section may not appear depending on the applica- tion you use.
Page 109: Summary
Summary The Summary is used to check the currently selected print settings. 1-84 Specifying Print Settings (Mac OS X 10.4)
Page 110: Specifying Print Settings (Mac Os X 10.5/10.6)
Specifying Print Settings (Mac OS X 10.5/ 10.6) The following dialog box appears when Print... is selected from the File menu in the application being used. Select Print... from the File menu. The Print dialog box appears. Select this printer in the Printer pop-up menu. The Print dialog box is used to specify the following print options.
Page 111: Common Buttons
Section Description Scheduler This section contains options for specifying the print timing and priority of jobs. Color Options This section contains options for color print- ing. Printer Features This section contains options for specifying paper type and resolution settings. Supply Levels This section provides information for check- ing the amount of service life remaining on each consumable.
Page 112: Layout
Orientation Select either a vertical or horizontal page orientation for printouts. Layout The Layout section is used to specify the page layout when printing and the setting for double-sided printing. Pages per Sheet Specifies the number of pages to be printed on one sheet of paper. For example, if 2 is selected, two pages are printed on one sheet of paper.
Page 113: Color Matching
Two-Sided Select the desired setting for double-sided printing. Off: Double-sided printing is not performed. Long-edge binding: Double-sided printing is performed with the bind- ing along the long edge of the paper. Short-edge binding: Double-sided printing is performed with the bind- ing along the short edge of the paper.
Page 114: Paper Handling
Paper Handling The Paper Handling section is used to specify the pages that are to be printed and the order in which the pages are printed. Pages To Print All pages: Select this option to print all pages. Odd Only: Select this option to print only the pages with odd page num- bers.
Page 115: Paper Feed
Paper Feed The Paper Feed section is used to specify the paper feed setting. All pages from All pages in the document are printed using the paper in the specified paper tray. First page from The first page of the document is printed on paper from a paper tray differ- ent from the tray used to print the rest of the document.
Page 116: Cover Page
Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type. Billing Info Allows you to set billing information printed on cover page. Specifying Print Settings (Mac OS X 10.5/10.6) 1-91...
Page 117: Scheduler
Scheduler The Scheduler section is used to specify the timing and priority for printing jobs. Print Document Now: Select this option to begin printing immediately. Specify the time to begin printing. On Hold: Select this option to hold the print job. Priority Select the priority for printing jobs that are being held.
Page 118: Color Options
Color Options Quick Color Allows you to select a color preset. Brightness Allows you to set Brightness. Color as Grayscale Allows you to set Grayscale color. Color Separation Allows you to set Color Separation. Economy Print Allows you to set Economy Print mode. Edge Strength Allows you to select Edge Strength.
Page 119: Advanced Color Options/Image
Black Over Print Allows you to specify whether black objects are printed (superimposed) on a neighboring color in order to prevent white space around black char- acters or figures. If Text/Figure is selected, superimposed printing is applied to text and graphics.
Page 120: Advanced Color Options/Text
Edge Enhancement Allows you to select Edge Enhancement for images. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane. Manage Profile Click this button to display the Color Profile Management dialog box. From this dialog box, color profiles can be added or deleted to those avail- able as settings for RGB Source and Simulation Profile of the Advanced Color Options pane.
Page 121 Edge Enhancement Allows you to select Edge Enhancement for text. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane. Manage Profile Click this button to display the Color Profile Management dialog box. From this dialog box, color profiles can be added or deleted to those avail- able as settings for RGB Source and Simulation Profile of the Advanced Color Options pane.
Page 122: Advanced Color Options/Graphics
Advanced Color Options/Graphics RGB Source Allows you to select RGB color profiles for graphics. RGB Intent Allows you to select color intent for RGB graphics. RGB Gray Treatment Allows you to select RGB gray treatment for graphics. Destination Profile Allows you to select Destination Profile for graphics. Halftone Allows you to select halftone for graphics.
Page 123: Advanced Color Options/Simulation
Advanced Color Options/Simulation Simulation Profiles Allows you to select color profiles for simulation. Match Paper Color Allows you to set Match Paper Color. CMYK Gray Treatment Allows you to select Simulation gray treatment. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane.
Page 124: Printer Features
Printer Features Nearest Size and Scale If no paper tray contains paper of the specified size, the page is automati- cally enlarged or reduced and paper of the most appropriate size is selected. Manually Print on 2nd Side This feature must be set when you set paper already printed on the front side.
Page 125: Supply Levels
Supply Levels The Supply Levels section provides information for checking the amount of service life remaining on each consumable. The Supply Levels section appears when a printer is created on Mac OS X 10.5 with a Bonjour, IPP, LPD, Socket connection. The Supply Levels section may not appear depending on the applica- tion you use.
Page 126: Summary
Summary The Summary is used to check the currently selected print settings. Specifying Print Settings (Mac OS X 10.5/10.6) 1-101...
Page 127: Specifying The Color Profile
Specifying the Color Profile Use Download Manager to download any color profile to the hard disk or the CompactFlash card of the machine. By adding color profiles to the printer driver, printing can be performed by specifying any color profile. The procedure for specifying the color profile on Mac OS X 10.5 is described below.
Page 128 Click Download, and then select Disk or Flash beside Location. "Flash" means CompactFlash card. Click Browse, and then select the color profile to be downloaded. File names for color profiles should be in the following format: 8 or less ASCII characters + 3 or less ASCII extension characters. Click Download Profile.
Page 129: Specifying Printer Driver Settings
Click OK. Click Exit. Next, specify the printer driver settings. Specifying Printer Driver Settings Add the color profile to the printer driver. Display the Print dialog box for the application. Select Color Options. 1-104 Specifying the Color Profile...
Page 130 Select Custom beside Quick Color, and then click Advanced Color Options. Click Manage Profile. Specifying the Color Profile 1-105...
Page 131 From Profile List, select the type of profile to use. Select the color profile to use from the list, and then click Add. 1-106 Specifying the Color Profile...
Page 132 Click OK. Select Simulation. Specifying the Color Profile 1-107...
Page 133 Select the added color profile before printing. 1-108 Specifying the Color Profile...
Page 134: Troubleshooting
Troubleshooting Symptom Solution The setting in the saved Depending on the functions selected for the presets are not applied. printer, some preset settings are not saved. Media type error appears. If a media type, such as “Thick paper”, is specified for Tray 1 or Tray 2, a media type error appears and the printer stops.
Page 135 Symptom Solution When printing 2 pages on a Depending on the operating system, the single sheet of paper, the pages are not centered on the paper when pages are not centered on printing two pages on a single sheet of paper the paper.
Page 136: Operation On Linux
Operation on Linux...
Page 137: System Requirements For The Printer Driver
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the fol- lowing system requirements. Operating systems Red Hat Enterprise Linux 5 Desktop SUSE Linux Enterprise Desktop 10 Connecting the computer USB connection, Network connection and printer (10Base-T/100Base-TX/1000Base-T) More than OS recommendation (128 MB or...
Page 138: Adding The Printer Using Printer Configuration
Enter the command “/etc/init.d/cups restart”. Quit Terminal. Adding the Printer Using Printer configuration Before proceeding with the installation, be sure to exit all running applications. Root privileges are required in order to add the printer. Connect the printer to a computer or the network. - With a USB connection, the following dialog box appears.
Page 139 The Printer configuration dialog box appears. Click New Printer. The New Printer dialog box appears. Enter the Printer name, Description, and Location, and then click For- ward. The printers that can be used are automatically searched for and listed in the left pane of the dialog box.
Page 140 From the left pane of the dialog box, select the port for the printer to be installed. - For a USB connection, select KONICA MINOLTA bizhub C35P USB - For a printer connected to the network, select KONICA MINOLTA bizhub C35P <IP address>.
Page 141 A ppd file for each language is available in the corresponding "Drivers/ LinuxPPD/<language>" folder on the CD/DVD. Use the appropriate ppd file for the language. Click Open. The Select A File dialog box is closed, and the name of the selected PPD file is displayed.
Page 142: Adding The Printer On The Cups Administration Web Page
Adding the Printer on the CUPS Administration Web page Before proceeding with the installation, be sure to exit all running applications. Root privileges are required in order to add the printer. Connect the printer to a computer or the network. - With a USB connection, the following dialog box appears.
Page 143 /192.168.1.190:9100 Using printer Hostname - socket://Hostname:9100 Hostname may be substi- tuted by IP Address, and Port is optional. Click Continue. Select KONICA MINOLTA, click Continue A ppd file for each lan- guage is available in the corresponding "Drivers/ LinuxPPD/<language>" folder on the CD/DVD.
Page 144 Select KONICA MINOLTA bizhub C35P (en), then click Add Printer. A pop-up window appears. Enter the user name and password for using root privi- leges, and then click OK. The following message appears. Adding the Printer on the CUPS Administration Web page...
Page 145: Specifying Printer Driver Settings
Specifying Printer Driver Settings Displaying the Settings Page Start up the Web browser. Enter the URL “http://local- host:631”, and then click Manage Printers. The following window appears. Click Set Printer Options. The printer driver settings page appears. 2-10 Specifying Printer Driver Settings...
Page 146: Printer Driver Settings
Printer Driver Settings Options Installed Parameters Settings Paper Source Unit Select Unit 3 if an optional lower feeder unit PF-P09 for the printer has been installed. The default setting is Disabled. Storage Select None, CF (1GB Over) or HDD for the storage unit that is installed.
Page 147 Parameters Settings Paper Source Specifies the paper source as Tray 1, Tray 2, Tray 3, Tray 1 (Manual Feed), or Auto. The default setting is Tray 1. Manually Print on 2nd side Select whether or not to print on the back side of paper that has already been printed The default setting is Off.
Page 148: Image Options
Parameters Settings Black Over Print Specify whether black objects are printed (superimposed) on a neighboring color in order to prevent white space around black characters or figures. If Text/Figure is selected, superimposed printing is applied to text and graphics. If Text is selected, superimposed printing is applied to text.
Page 149: Text Options
Text Options Parameters Settings Text RGB Source Specifies RGB source for text as None, sRGB, Adobe RGB (1998), Apple RGB, ColorMatch RGB, or Blue Adjust RGB. The default setting is sRGB. Text RGB Intent Specifies RGB intent for text as Vivid, Pho- tographic, Relative Color, or Absolute Color.
Page 150: Simulation
Parameters Settings Graphics Halftone Specifies the halftone for graphic as Line Art, Detail or Smooth. The default setting is Detail. Graphics Edge Enhance- Select whether graphic edges are empha- ment sized. The default setting is On. Simulation Parameters Settings Simulation Profile Specifies the simulation profile as None, SWOP, Euroscale, Commercial Press, Japan Color, DIC, or TOYO.
Page 151: Printing A Document
Printing a Document The contents and available options that appear in the print dialog box may vary depending on the application being used. Example Using OpenOffice The procedure for printing on Red Hat Enterprise Linux 5 with Ope- nOffice 2.0.4 is described below. The following procedure or some steps may be different depending on the version of the operating sys- tem being used.
Page 152 Select the name of the printer. Click Print to print the document. Printing a Document 2-17...
Page 153: Checking Print Jobs
Checking Print Jobs You can check the status of print jobs from a Web browser. Start up the Web browser. Enter the URL “http://local- host:631”. The CUPS Administration Web page appears. Click Manage Jobs. A list of the currently active print jobs appear.
Page 154: Troubleshooting
Troubleshooting Symptom Action The printer stops because The job may have been sent with a prohibited of a paper size error or a combination of settings (for example, for the paper type error. paper size and media type). Printing is not possible with postcards or overhead projector transparencies if Plain Paper is selected.
Page 155 2-20 Troubleshooting...
Page 156: Operation On Netware
Operation on NetWare...
Page 157: Printing With Netware
Printing With NetWare The printer controller supports the following environments. Network Printing in a NetWare Environment NetWare Version Protocol Used Emulation Service Mode NetWare 4.x Bindery/NDS Pserver/Nprinter NetWare 5.x/6 Pserver TCP/IP NDPS(lpr) For Remote Printer Mode With NetWare 4.x Bindery Emulation Before using bindery emulation, check that bindery emulation is compatible with the NetWare server.
Page 158 In Administrator mode of PageScope Web Connection, select Net Ware from the Network tab, and then specify the following settings. – Netware Print: Select Enable. – Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) –...
Page 159: For Print Server Mode With Netware 4.X Bindery Emulation
For Print Server Mode With NetWare 4.x Bindery Emulation Before using bindery emulation, check that bindery emulation is com- patible with the NetWare server. From a client computer, log on with Supervisor permissions to access the NetWare server where the Pserver is registered. Start up Pconsole.
Page 160: For Netware 4.X Remote Printer Mode (Nds)
– Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select PServer. – Print Server Name: Specify the print server name created in step 4. – Print Server Password: Specify only when setting from the NetWare server. –...
Page 161 In Administrator mode of PageScope Web Connection, select NetWare from the Network tab, and then specify the following settings. – Netware Print: Select Enable. – Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select NPrinter/RPrinter.
Page 162: For Netware 4.X/5.X/6 Print Server Mode (Nds)
For NetWare 4.x/5.x/6 Print Server Mode (NDS) To use the Print Server mode, the IPX protocol must be loaded on the NetWare server. Log on to NetWare as an administrator from a client computer. Start up NWadmin. Select either the organization or organizational unit container that offers the print service, and then click Print Services Quick Setup (non-NDPS) on the Tools menu.
Page 163 – Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select PServer. – Print Server Name: Specify the print server name created in step – Print Server Password: Specify only when setting from the Net-Ware server.
Page 164: For Netware 5.X/6 Novell Distributed Print Service (Ndps)
For NetWare 5.x/6 Novell Distributed Print Service (NDPS) Before specifying settings for NDPS, check that the NDPS broker and NDPS manager have been created and loaded. Also, before performing the following procedure, check that the TCP/ IP protocol has been set in the NetWare server, and check that the IP address has been set for this machine and that this machine is on.
Page 165: Setting Up A Client (Windows) Settings When Using The Netware Server
Setting Up a Client (Windows) Settings When Using the NetWare Server For Windows 2000, click the [Start] button, point to Settings, and then click Printers. For Windows 7/Server 2008 R2, click the [Start] button, select Control Panel, and then click Hardware and Sound to select Devices and Print- ers.
Page 166: Printer Utilities
Printer Utilities...
Page 167: Installing Printer Utilities On Windows
Installing Printer Utilities on Windows You must have administrator privileges in order to install the Printer Utilities. Before proceeding with the installation, be sure to exit all running applications. The following procedure describes how to install the Printer Utilities. End User Tools Status Monitor PageScope Direct Print Administration Tools...
Page 168: Understanding The Ethernet Configuration Menus
Understanding the Ethernet Configuration Menus...
Page 169: Ethernet Menu
Ethernet Menu Location within the Configuration Menu READY PROOF/ PRINT MENU PRINT MENU PAPER MENU QUALITY MENU MEMORY DIRECT JOB TIME- INTERFACE MENU ENABLE ETHERNET TCP/IP MEMORY DIRECT ADDRESS SUBNET MASK DEFAULT GATEWAY DHCP BOOTP SYS DEFAULT ARP/PING MENU MAINTENANCE HTTP ENABLE MENU...
Page 170 TELNET BONJOUR ENABLE DYNAMIC ENABLE ENABLE ENABLE RAW PORT BIDIREC- TIONAL ENABLE SMTP ENABLE SNMP ENABLE WSD PRINT ENABLE IPSEC ENABLE ACCESS PERMISSION IP ADDRESS FILTER ACCESS REFUSE IPv6 ENABLE AUTO NETWARE ENABLE SETTING LINK LOCAL APPLETALK ENABLE GLOBAL ADDRESS SPEED/ DUPLEX GATEWAY...
Page 171: Accessing The Ethernet Menu
Accessing the Ethernet Menu Use the following series of keystrokes at the printer to access the Ethernet menu options on your printer. This menu provides access to all of the config- urable network items. Press this (until) the message window reads. . . key .
Page 172: Using The Network Menu Options
Using the Network Menu Options If the printer is connected to a network, the following settings should be spec- ified. For details about each setting, contact your network administrator. When manually setting the IP address, Subnet Mask, and Gateway turn off DHCP first. TCP/IP ENABLE Purpose...
Page 173 DEFAULT GATEWAY Purpose Sets the address of the router/gateway if a router/gateway is used on your network and you allow users outside your network environment to print on your printer. Range 0–255 for each xxx triplet Use the Up and Down keys to increase or decrease each number;...
Page 174 HTTP – ENABLE Purpose Select whether or not to enable HTTP. If YES is selected, HTTP is enabled. If NO is selected, HTTP is disabled. Options Default FTP – ENABLE Purpose Select whether or not to enable FTP. If YES is selected, FTP is enabled. If NO is selected, FTP is disabled.
Page 175 DYNAMIC DNS – ENABLE Purpose Select whether or not to enable Dynamic DNS. If YES is selected, Dynamic DNS is enabled. If NO is selected, Dynamic DNS is disabled. Options Default IPP – ENABLE Purpose Select whether or not to enable IPP. If YES is selected, IPP is enabled.
Page 176 SLP – ENABLE Purpose Select whether or not to enable SLP. If YES is selected, SLP is enabled. If NO is selected, SLP is disabled. Options Default SMTP – ENABLE Purpose Select whether or not to enable SMTP. If YES is selected, SMTP is enabled. If NO is selected, SMTP is disabled.
Page 177 IPSEC – ENABLE Purpose Select whether or not to enable IPsec. If YES is selected, IPsec is enabled. If NO is selected, IPsec is disabled. Options Default IP ADDRESS FILTER – ACCESS PERMISSION Purpose Select whether or not to enable Access Permission trans- missions.
Page 178: Netware
IPv6 – ENABLE Purpose Select whether or not to enable IPv6. If YES is selected, IPv6 is enabled. If NO is selected, IPv6 is disabled. Options Default IPv6 – AUTO SETTING Purpose Select whether or not to enable Auto Setting. If YES is selected, Auto Setting is enabled.
Page 179: Appletalk
APPLETALK ENABLE Purpose Select whether or not to enable AppleTalk. If YES is selected, AppleTalk is enabled. If NO is selected, AppleTalk is disabled. Options Default SPEED/DUPLEX Purpose Specifies the transmission speed for the network and the transmission method for bi-directional transmission. Options AUTO 10BASE FULL...
Page 180: Network Printing
Network Printing...
Page 181: Network Connection
Network Connection Theory To connect your printer in a TCP/IP network environment, you must make sure that the internal network addresses in the printer have been set. In many cases, you have to enter only a unique IP address. However, you may also have to enter a subnet mask and/or a gateway (router) address,...
Page 182: Making The Connection
Making the Connection Ethernet Interface An RJ45 connector can be used as the Ethernet interface for this printer. When connecting your printer to an Ethernet network, the tasks you perform depend on how you plan to set the printer’s IP (Internet Protocol) address. Printers are shipped with a preset IP address, subnet mask, and gateway.
Page 183 When the printer’s message window displays , print a configura- READY tion page to verify that the IP address is set. Press this (until) the message window displays . . . key . . . READY PROOF/PRINT MENU or if no optional hard disk kit is installed: HD-P03 PRINT MENU...
Page 184: Setting The Address Manually
Setting the Address Manually You may also manually change the printer’s IP address, subnet mask, and gateway by using the following instructions. (See Chapter 5 “Understanding the Ethernet Configuration Menus” for more information.) When manually setting the IP address, turn off DHCP, BOOTP and ARP/PING first.
Page 185 Press this (until) the message window reads . . . key . . . ENABLE IP ADDRESS IP ADDRESS 000.000.000.000 Use the keys to move to each of the four number triplets. Use the keys to increase or decrease each number. IP ADDRESS If you don’t set the subnet mask or gateway, go to step 5.
Page 186 Press this (until) the message window displays . . . key . . . Use the keys to move to each of the four number triplets. Use the keys to increase or decrease each number. SUBNET MASK If you don’t set the gateway, go to step 5. If you set the gateway, follow these steps.
Page 187 Save your configuration changes and make the printer ready for printing again. Press this (until) the message window displays . . . key . . . Press the Cancel key 4 times. Print a configuration page to verify that the correct IP address, subnet mask, and gateway have been set.
Page 188: Network Printing
Network Printing Network printing terms are described below. AppleTalk Bonjour BOOTP DDNS DHCP HTTP IEEE802.1x IPsec IPv6 IPX/SPX LLMNR LLTD LPD/LPR SMTP SNMP Port9100 WSD print This chapter contains descriptions on the network printing terms and the IPP printing methods. AppleTalk A generic name for the protocol suite developed by Apple Computer for com- puter networking.
Page 189: Bootp
BOOTP BOOTP (Bootstrap Protocol) is an Internet protocol that enables a diskless workstation to discover (1) its own IP address, (2) the IP address of a BOOTP server on the network, and (3) a file that can be loaded into memory to boot the workstation.
Page 190: Ieee802.1X
IEEE802.1x This protocol for determining the user authentication method within the LAN is compatible with wireless and wired LANs. Using the RADIUS server for user authentication, communication with authenticated users is permitted while all communication from unauthenticated clients is blocked, excluding authentication requests.
Page 191: Lltd
LLTD The acronym for Link Layer Topology Discovery, which is a technology inves- tigating how the devices on the network are connected. Network devices with this technology are recognized by Windows Vista/Server 2008 on the net- work, and displayed as icons configured on the network map of Windows Vista.
Page 192: Smtp
SMTP SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail. This protocol was originally used to send e-mail between servers; however, currently client e-mail software use it to also send e-mail to servers using POP. SNMP SNMP (Simple Network Management Protocol) is actually a set of protocols for managing complex networks.
Page 193: Printing Via Ipp (Internet Printing Protocol)
Printing via IPP (Internet Printing Protocol) You must have administrator privileges in order to install the printer driver. If the User Account Control window appears when installing on Win- dows 7/Vista/Server 2008, click the Allow button or the Continue but- ton.
Page 194 The connected printers are detected. Select this printer. [Search Setting]: To search for printers on other networks, click this but- ton. [Update List]: To update the printer information, click this button. Select Internet Printing as the printing method from the pull-down list, and then click Next.
Page 195: Adding An Ipp Port Using Add Printer Wizard - Windows Server 2003/Xp/2000
In the Confirm Installation Settings dialog box, click Install. [Installation Settings]: To change the settings, click this button. Click Finish. This completes the installation of the printer driver. Adding an IPP Port using Add Printer Wizard - Windows Server 2003/XP/2000 For Windows Server 2003/XP: Click Start, select Printers and Faxes, and then click Add a Printer.
Page 196 In the second dialog box, select the Network Printer radio button, and then choose Next. Windows Server 2003/XP Windows 2000 In the URL field in the next dialog box, enter the printer’s network path- name in one of the following formats, and then choose Next: http://ipaddress/ipp http://ipaddress:80/ipp http://ipaddress:631/ipp...
Page 197 Windows 2000—If you entered a valid path in the previous step, the fol- lowing message displays: “The server on which the KONICA MINOLTA bizhub C35P printer resides does not have the correct printer driver installed. If you want to install the driver on your local computer, click OK.”...
Page 198 Click OK. Click OK. Network Printing 6-19...
Page 199 Select whether the printer is to be used as the default printer, and then click Next. Click Finish. 6-20 Network Printing...
Page 200: Adding An Ipp Port Using Add Printer Wizard - Windows 7/Vista/Server 2008 R2/Server 2008
Adding an IPP Port using Add Printer Wizard - Windows 7/ Vista/Server 2008 R2/Server 2008 Click Start, click Control Panel, and then click Printers. When using Windows 7/Server 2008 R2/Server 2008, View devices and printers under Hardware and Sound. Click Add a printer. In the dialog box click Add a network, wireless or Bluetooth printer.
Page 201 In the URL field in the next dialog box enter the printer’s network path- name in one of the following formats and then choose Next: http://ipaddress/ipp http://ipaddress:80/ipp http://ipaddress:631/ipp If your system cannot connect to the machine, the following message appears: “Windows cannot connect to the printer. Make sure that you have typed the name correctly, and that the printer is connected to network.”...
Page 202 Click Browse. Locate the directory on the CD/DVD where the printer driver files are located and then click Open. Click OK. Click OK. Network Printing 6-23...
Page 203 Click Next. Click Finish. 6-24 Network Printing...
Page 204: Printing Via Web Service Print Function
Printing via Web Service Print Function In Windows 7/Vista/Server 2008 R2/Server 2008, printers on the network that support Web Service print can be detected and installed. You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications.
Page 205: Adding A Printer From The Network Window - Windows Vista/Server 2008
To use Web Service print, check that Network discovery is enabled in Network and Sharing Center on the computer. Open the Network window. – In Windows Vista/Server 2008, click Start, and Network. – In Windows 7/Server 2008 R2, open Computer and click Net- work.
Page 206 Select the device name of this printer, and then click Install on the toolbar. Click Locate and install driver software (recommended). Network Printing 6-27...
Page 207 If Windows Vista is being used, go to step 8. If Windows Server 2008 is being used, click Don't search online. Click Browse my computer for driver software (advanced). 6-28 Network Printing...
Page 208 Click Browse. Locate the directory on the CD/DVD where the printer driver files are located and then click OK. Click Next. Click Close. Network Printing 6-29...
Page 209: Adding A Printer Using Add Printer Wizard
Adding a printer using Add Printer Wizard In Windows Vista/Server 2008, you can add a Web service device using the addition function of the printer after connecting this machine. In Windows 7/Server 2008 R2, a window for specifying an installation disk does not appear after the machine is connected to the computer.
Page 210 Click Create a new port, and then select Standard TCP/IP Port. Click Next. Select Web Services Device and type the IP address for the printer, and then click Next. The Found New Hardware Wizard dialog box appears. Network Printing 6-31...
Page 211 Click Locate and install driver software (recommended). If Windows Vista is being used, go to step 12. If Windows Server 2008 is being used, click Don't search online. 6-32 Network Printing...
Page 212 Click Browse my computer for driver software (advanced). Click Browse. Locate the directory on the CD/DVD where the printer driver files and then click OK. Click Next. Click Close. Network Printing 6-33...
Page 213 Click Next. Select whether the printer driver is to be shared, and then click Next. 6-34 Network Printing...
Page 214 Click Finish. This completes the installation of the printer driver. Network Printing 6-35...
Page 215: Installing The Driver When The Operating Systems Of The Server And Client Use A Different Number Of Bits (With Windows Server 2008 R2/Server 2008)
Installing the Driver When the Operating Systems of the Server and Client Use a Different Number of Bits (With Windows Server 2008 R2/Server 2008) When Windows Server 2008 R2/Server 2008 is running on the print server or when the operating systems running on the print server and client computer use a different number of bits, the additional driver may not be installed cor- rectly on the print server.
Page 216 From the print server (32 bits), map the client computer (64 bits) drive (for example, “C”), specified as a shared drive in step 1, as a network drive (for example, “z”). This setting is available for only PS driver. Install on the print server (32 bits) the driver for a 32-bit operating system. Network Printing 6-37...
Page 217 Right-click the printer that was installed, and then click the appropriate menu command to display printer properties. Select the Sharing tab, and then select the Share this printer check box. Click Additional Drivers. The Additional Drivers dialog box appears. Under Processor, select the x64 check box, and then click OK. 6-38 Network Printing...
Page 218 Specify the folder containing the driver for a 64-bit operating system. A dialog box appears, requesting the location of the setup information file. Click Browse, and then select the setup information file (ntprint.inf) on the client computer mapped as a network drive. This setting is available for only PS driver.
Page 219: Troubleshooting
Troubleshooting Symptom Action Some client functions are Install the printer driver directly on the client not available with the Point computer. and Print feature when the server is running Windows Server 2008 R2/Server 2008/Server 2003 and the client computer is running Windows 7/Vista/XP/2000.
Page 220: Using Pagescope Web Connection
Using PageScope Web Connection...
Page 221: About Pagescope Web Connection
About PageScope Web Connection This chapter provides information on PageScope Web Connection, an HTTP (HyperText Transfer Proto- col)-based web page that resides in your printer and that you can access using your Web browser. This page gives you instant access to printer status and the most frequently used printer configuration options.
Page 222: Requirements
Requirements To use PageScope Web Connection, the following is required: Windows 7/Vista/XP/Server 2008 R2/Server 2008/Server 2003/2000 Mac OS X 10.2.8/10.3/10.4/10.5/10.6 Red Hat Enterprise Linux 5, SUSE Linux Enterprise 10 Microsoft Internet Explorer version 6.0 or later Mozilla Firefox version 2.0 or later You do not need an Internet connection.
Page 223: Setting Up The Printer Web Page
Through the assigned name of the printer—This name comes from the IP host table (the filename is hosts) on the computer system and is usually assigned by the system administrator (for example, bizhub C35P). It may be more convenient for you to use the printer name than the IP address.
Page 224: Setting Up Your Browser Software
Setting Up Your Browser Software Since your printer resides on your intranet and is not accessible beyond the firewall of your network, you must set up the proper “preferences” in your browser software. Your printer name or IP address must be added to the “no proxy”...
Page 225: Mozilla Firefox (Version 2.0 For Mac Os X 10.5)
Mozilla Firefox (version 2.0 for Mac OS X 10.5) Start Mozilla Firefox. From the Firefox menu choose Preferences. Click Advanced at the top of the dialog box. Click the Network tab. In the Connection section, click Settings. The Connection Settings dialog box appears.
Page 226: Understanding The Pagescope Web Connection Window
The illustration below identifies the navigation and configuration areas of the windows that you see in PageScope Web Connection windows. Links to main Link to Printer name topics Current status KONICA MINOLTA web site Version information Click to log out of current mode Links to subtopics...
Page 227: Current Status
Current Status The current status of the printer is displayed at the top of all PageScope Web Connection windows. The icon displays the type of status being displayed. Icon Status Description Examples Ready The printer is online READY and either ready to WARMING UP print or printing.
Page 228: Logging On To Pagescope Web Connection
Logging on to PageScope Web Connection Login Page User authentication, account track and language settings can be specified by using PageScope Web Connection. In order to perform authentication, you must log on in Administrator Mode. For details on authentication, refer to “Authentication”...
Page 229: Language Setting
Language Setting If necessary, the display language used for Web Connection can be changed. Public User Mode In Public User Mode, you can view configuration settings but not change them. Select Public User. Click the Log in button. Registered User Mode In Registered User Mode, you can view configuration settings but not change them.
Page 230: Account Track Mode
If Account Track (in the Network - Authentication - User Authentica- tion page) is set to On, continue with step 4. If it is set to Off, continue with step 5. – (If Synchronize User Authentication & Account Track is set to Do Not Synchronize and Account Track Method is set to Account Name &...
Page 231: Administrator Mode
Administrator Mode In order to change any configuration settings through PageScope Web Con- nection, you must first enter Administrator Mode. Select Administrator. Click the Log in button. Type the password in the Admin Password text box. Default password is set to “administrator”; however, once you have logged on in Administrator Mode, the password can be specified in the System - Admin Password window.
Page 232: Viewing Printer Status
Viewing Printer Status System Page On this page you find printer status and current configuration settings, printer identification, and links to all other web pages. All of the information displayed on the System page is read only. Viewing Printer Status 7-13...
Page 233: Device Information
Device Information Summary (previous page) The System - Device Information - Summary window provides the follow- ing information. Item Description Memory Displays the amount of memory installed in the printer. If an optional hard disk kit HD-P03 is installed in the printer, displays the size of the hard disk.
Page 234 Paper Source The System - Device Information - Paper Source window provides the fol- lowing information. Item Description Paper Source Identifies the paper feed units Tray 1/2/3 installed on the printer. Paper Size Indicates the size of paper loaded in a specific tray. Paper Type Indicates the type of paper loaded in a specific tray.
Page 235 Paper Source (Detail) The System - Device Information - Paper Source - Detail window provides the following information. Item Description Paper Source Displays the names of the paper trays. Paper Size Displays the paper sizes. Paper Type Displays the paper types. Capacity Displays the maximum capacity for each paper tray.
Page 236 Output Tray The System - Device Information - Output Tray window provides the fol- lowing information. Item Description Tray Displays the name of the output tray. Paper Displays the status (Ready, Full) of the output tray. Viewing Printer Status 7-17...
Page 237 Storage The System - Device Information - Storage window provides the following information. Item Description Total Displays the total amount of space on the hard disk and CompactFlash card. If no optional storages are installed, “-” are dis- played. Used Displays the amount of space on the hard disk and CompactFlash card that are used.
Page 238 Interface Information The System - Device Information - Interface Information window provides the following information. Item Description Protocol TCP/IP If Enable is displayed, TCP/IP is enabled. Information If Disable is selected, TCP/IP is disabled. IPv6 If Enable is displayed, IPv6 is enabled. If Disable is selected, IPv6 is disabled.
Page 239 Item Description Dynamic DNS If Enable is displayed, Dynamic DNS is enabled. If Disable is selected, Dynamic DNS is dis- abled. If Enable is displayed, IPP is enabled. If Disable is selected, IPP is disabled. If Enable is displayed, LPD is enabled. If Disable is selected, LPD is disabled.
Page 240 Item Description Network Type Identifies the type of network interface Information installed on the printer (Ethernet 10Base-T/ 100Base-TX/1000Base-T). Ethernet Speed Indicates the transmission speed for the net- work and the transmission method for bidi- rectional transmission. IP Address Identifies the IP (Internet Protocol) address of the Ethernet interface.
Page 241 Consumables The System - Device Information - Consumables window provides the fol- lowing information. Item Description Consumables Identifies the type of consumable that is being moni- tored. Status Indicates the remaining life of the consumables. Toner Cartridge, Imaging Unit, Transfer Belt, Transfer Roller, Fuser Unit: Percentage Waste Toner Bottle: Ready, Near Full, or Full TYPE...
Page 242: Counter
Counter The System - Counter window provides the following information. Item Description Pages Printed Indicates the number of prints. Sheets Printed by Indicates the number of prints grouped by Paper Paper Size Size. Sheets Printed by Indicates the number of prints grouped by Paper Paper Type Type.
Page 243: Online Assistance
Contact Information Displays the web address for assistance. Product Help URL Displays the web address for assistance. Corporate URL Displays the KONICA MINOLTA web address. Supplies and Accesso- Displays the web address where you can order ries printer supplies and accessories.
Page 244: User Authentication
User Authentication This page appears only when logged on to Registered User Mode. User Password Change The password for the user who is logged on can be changed from the Sys- tem - User Authentication - User Password Change page. Item Description User Name...
Page 245 Item Description Apply button Applies the new password. If the password typed in three text boxes doesn’t match, the following message displays when you choose the Apply button: “Password was changed unsuccessfully. Please retry.” Retype the passwords in both text boxes. Clear button Resets all configuration settings to previous values.
Page 246 Item Description Output Permission Shows whether color printing and whether Information black-and-white printing is permitted by the user who is logged on. Viewing Printer Status 7-27...
Page 247: Job Page
Job Page This page allows you to view the status of current print jobs. Active Job List (shown above) The Job - Active Job List window provides the following information for up to 49 print jobs: Item Description Job Number Displays the print job identification number.
Page 248: Done Job List
Done Job List The Job - Done Job List window provides the following information for up to 50 print jobs: Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Page 249: Done Job List (Detail)
Done Job List (Detail) The Job - Done Job List - Detail window provides the following information for the selected job: Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Page 250: Print Page
Print Page This page allows you to check the settings for printing when there is no PDL printer driver. Default Settings General Settings (shown above) The Print - Default Settings - General Settings window provides the follow- ing information. Item Description Indicates default language to be selected.
Page 251 Item Description Width Indicates the paper width when Paper Size is set to Custom Size. Length Indicates the paper length when Paper Size is set to Custom Size. Paper Type Indicates the default setting for the type of paper. Collate If On is indicated, all pages in a copy of the docu- ment can be printed before printing the next copy.
Page 252 Paper Source Settings The Print - Default Settings - Paper Source Settings window provides the following information. Item Description Tray1 Paper Size Indicates the setting for the size of paper loaded into Tray 1. Width Indicates the paper width when Paper Size is set to Custom Size.
Page 253 Item Description Tray3 Paper Size Indicates the setting for the size of paper loaded into Tray 3. This item Paper Type Indicates the setting for the type of paper appears only if loaded into Tray 3. an optional lower feeder unit PF-P09 is installed.
Page 254 Tray Mapping Settings The Print - Default Settings - Tray Mapping Settings window provides the following information. Item Description Tray Mapping Mode If On is indicated, Tray Mapping function is used. If Off is indicated, Tray Mapping function is not used.
Page 255 PCL Settings The Print - Default Settings - PCL Settings window provides the following information. Item Description Font Number Displays the default font in the PCL language. Symbol Set Displays the symbol set used with the PCL lan- guage. Lines Per Page Indicates how many lines are in a page in PCL lan- guage.
Page 256 PS Settings The Print - Default Settings - PS Settings window provides the following information. Item Description Wait Timeout Indicates Postscript timeout. “0” means that no time-out control is effective. PS Protocol Displays the settings for the PS protocol. Print to PS Error Displays whether or not error printing is performed.
Page 257 XPS Settings The Print - Default Settings - XPS Settings window provides the following information. This page appears only if a hard disk kit HD-P03 or a CompactFlash card is installed. Item Description Digital Signature Shows whether XPS digital signatures are enabled or disabled.
Page 258 Print Quality Settings The Print - Default Settings - Print Quality Settings window provides the following information. Item Description Print Color Mode If Color is indicated, the pages are Quality Set- printed in full color. tings If Monochrome is indicated, the pages are printed in black and white.
Page 259 Item Description Edge Enhancement Shows the settings for whether or not (Image/Text/ edges are emphasized in images, text Graphics Printing) and graphics. Edge Strength Shows the setting for the amount that edges are emphasized. Economy Print Mode Shows the setting for whether or not Economy Print Mode is enabled.
Page 260 Item Description Calibration Tone Calibration If On is indicated, image adjustments are Settings applied. If Off is indicated, image adjustments are not applied. Cyan/Magenta/ Indicates the density of the highlight Yellow/ Black Density color. (Highlight) Cyan/Magenta/ Indicates the density of the middle color. Yellow/ Black Density (Middle) Cyan/Magenta/...
Page 261: Font/Form
Font/Form PCL Font The Print - Font/Form - PCL Font page allows you to check the list of PCL fonts that the printer manages. Item Description Number Displays the control number of the font. Font Name Displays the name of the fonts. Source Displays the storage source of the font.
Page 262 PS Font The Print - Font/Form - PS Font page allows you to check the list of Post- Script fonts that the printer manages. Item Description Number Displays the control number of the font. Font Name Displays the name of the fonts. Source Displays the storage source of the font.
Page 263 Form Overlay The Print - Font/Form - Form Overlay page allows you to check the list of form overlays that the printer manages. Item Description Number Displays the control number of the overlay. File Name Displays the name of the overlays. Source Displays the storage source of the form overlay.
Page 264 Color Profile The Print - Font/Form - Color Profile page allows you to check the list of color profiles that the printer manages. Item Description Number Displays the control number of the color profile. File Name Displays the file name of the color profile. Profile Name Displays the name of the color profile.
Page 265: Report Types
Report Types The Print - Report Types window provides the following information. Item Description Configuration Page Prints the printer configuration page. Statistics Page Prints the statistics page such as the number of pages printed. PCL Font Page Prints the PCL font lists. PS Font Page Prints the PostScript font lists.
Page 266: Direct Print
Direct Print The Print - Direct Print page allows you to print a file directly from the printer without starting up the application. This page appears only if a hard disk kit HD-P03 or a CompactFlash card is installed. This page appears when both Public Access (in the Network - Authentication - User Authentication page) and Print (in the Sys- tem - Authentication - Default Permission Settings) are set to Allow.
Page 267: Configuring The Printer
Configuring the Printer In order to make any configuration changes through PageScope Web Con- nection, you must first enter Administrator Mode. See “Administrator Mode” on page 7-12. for instructions on logging into Administrator Mode. System Page This page allows you to configure several user- and printer-specific items. 7-48 Configuring the Printer...
Page 268: Device Information
Device Information Summary (previous page) The System - Device Information - Summary window provides the follow- ing information. Item Description Memory Displays the amount of memory installed in the printer. If an optional hard disk kit HD-P03 is installed in the printer, displays the size of the hard disk.
Page 269 Paper Source The System - Device Information - Paper Source window provides the fol- lowing information. Item Description Paper Source Identifies the paper feed units Tray 1/2/3 installed on the printer. Paper Size Indicates the size of paper loaded in a specific tray. Paper Type Indicates the type of paper loaded in a specific tray.
Page 270 Paper Source (Detail) The System - Device Information - Paper Source - Detail window provides the following information. Item Description Paper Source Displays the names of the paper trays. Paper Size Displays the paper sizes. Paper Type Displays the paper types. Capacity Displays the maximum capacity for each paper tray.
Page 271 Output Tray The System - Device Information - Output Tray window provides the fol- lowing information. Item Description Tray Displays the name of the output tray. Paper Displays the status (Ready, Full) of the output tray. 7-52 Configuring the Printer...
Page 272 Storage The System - Device Information - Storage window provides the following information. Item Description Total Displays the total amount of space on the hard disk and CompactFlash card. If no optional storages are installed, “-” are dis- played. Used Displays the amount of space on the hard disk and CompactFlash card that are used.
Page 273 Interface Information The System - Device Information - Interface Information window provides the following information. Item Description Protocol TCP/IP If Enable is displayed, TCP/IP is enabled. Information If Disable is selected, TCP/IP is disabled. IPv6 If Enable is displayed, IPv6 is enabled. If Disable is selected, IPv6 is disabled.
Page 274 Item Description If Enable is displayed, IPP is enabled. If Disable is selected, IPP is disabled. If Enable is displayed, LPD is enabled. If Disable is selected, LPD is disabled. RAW Port If Enable is displayed, RAW Port is enabled. If Disable is selected, RAW Port is disabled.
Page 275 Item Description Network Type Identifies the type of network interface Information installed on the printer (Ethernet 10Base-T/ 100Base-TX/1000Base-T). Ethernet Speed Indicates the transmission speed for the net- work and the transmission method for bidi- rectional transmission. IP Address Identifies the IP (Internet Protocol) address of the Ethernet interface.
Page 276 Consumables The System - Device Information - Consumables window provides the fol- lowing information. Item Description Consumables Identifies the type of consumable that is being moni- tored. Status Indicates the remaining life of the consumables. Toner Cartridge, Imaging Unit, Transfer Belt, Transfer Roller, Fuser Unit: Percentage Waste Toner Bottle: Ready, Near Full, or Full TYPE...
Page 277: Counter
Counter The System - Counter window provides the following information. Item Description Pages Printed Indicates the number of prints. Sheets Printed by Indicates the number of prints grouped by Paper Paper Size Size. Sheets Printed by Indicates the number of prints grouped by Paper Paper Type Type.
Page 278: Online Assistance
Product Help URL Sets the help web site address for printer assis- tance. Range: Up to 127 characters Default: http://pagescope.com Corporate URL Sets the KONICA MINOLTA corporate web site address. Range: Up to 127 characters Default: http://konicaminolta.com Configuring the Printer 7-59...
Page 279 Item Description Supplies and Accesso- Sets the web address where you can purchase ries printer supplies and accessories. Range: Up to 127 characters Default: Contact Phone Number Specifies the telephone number of the printer administrator. Range: Up to 31 characters Default: [Blank] Contact Address Specifies the address of the printer administrator.
Page 280: Import/Export
Import/Export This page appears only if a hard disk kit HD-P03 or a CompactFlash card is installed. In addition, this page appears when Job Log (in the System - Machine Settings page) is set to Enable. Job Log The System - Import/Export - Job Log window allows you to configure the following items.
Page 281 Item Description Clear button Clears the job log from the device. User Information The System - Import/Export - User Information window allows you to con- figure the following items. This page appears when User Authentication (in the Network - Authentication - User Authentication page) is set to On. Item Description Import Text Box...
Page 282: Authentication
Authentication This page appears only if a hard disk kit HD-P03 or a CompactFlash card is installed. This page doesn’t appear when both User Authentication and Account Track are set to Off and Public Access is set to Restrict (in the Network - Authentication - User Authentication page).
Page 283 User Registration This menu item appears when User Authentication (in the Network - Authentication - User Authentication page) is set to On. The System - Authentication - User Registration window allows you to configure the following items. Item Description Search for Number Select the user registration number (No.) to be searched for.
Page 284 User Registration (New Registration) The System - Authentication - User Registration - New Registration win- dow allows you to configure the following items. Item Description User Shows the new user registration number (No.). Registration User Name Specify the name of the new user. Range: Up to 64 characters Default: [Blank] A user name that already exists cannot be...
Page 285 Item Description Account Specify the account that the user belongs to. Name Range: Up to 8 characters Default: [Blank] Create the account in the System - Authentication - Account Track Registration - New Registration page, and then specify this setting. When specifying this setting, an account name that does not exist cannot be specified.
Page 286 Account Track Registration This menu item appears when Account Track (in the Network - Authentication - User Authentication page) is set to On. The System - Authentication - Account Track Registration window allows you to configure the following items. Item Description Search for Number Select the account registration number (No.) to be...
Page 287 Account Track Registration (New Registration) The System - Authentication - Account Track Registration - New Regis- tration window allows you to configure the following items. Item Description Account Shows the new account registration number (No.). Track Reg- Account Specify the name of the new account. istration Name Range: Up to 8 characters...
Page 288 Item Description Function Print Select whether or not the new account is permitted Permission to print. Choices: Allow, Restrict Default: Allow Output Color Select whether or not the new account is permitted Permission to print in color. Choices: Allow, Economy Print Mode Only, Restrict Default: Allow Black Select whether or not the new account is permitted...
Page 289: Date/Time
Date/Time Manual Settings The System - Date/Time - Manual Settings window allows you to configure the following items: Item Description Year Specifies the year for the printer’s internal clock. Range: 2008 - 2032 Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - DATE Month Specifies the month for the printer’s internal clock.
Page 290 Item Description Hour Specifies the hour for the printer’s internal clock. Range: 0 - 23 Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - TIME Minute Specifies the minute for the printer’s internal clock. Range: 0 - 59 Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - TIME Time Zone Specifies the time zone for sending e-mail notifica-...
Page 291 Time Adjustment Settings The System - Date/Time - Time Adjust Settings window allows you to con- figure the following items: Item Description Time Adjustment Select whether or not the time is automatically adjusted with NTP. Choices: Enable, Disable Default: Disable NTP Server Address Specifies the NTP server address.
Page 292 Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Configuring the Printer 7-73...
Page 293: Admin Password
Admin Password The System - Admin Password window allows you to configure the follow- ing items: Item Description Current Password Type in the current password. Range: Up to 16 characters Default: [Blank] New Password Sets a new password to enter Administrator Mode. Range: Up to 16 characters Default: [Blank] Passwords can be set to any string of...
Page 294 Item Description Retype Password Verifies the new password typed in the New Pass- word text box. Range: Up to 16 characters Default: [Blank] If the password typed in three text boxes doesn’t match, the following message dis- plays when you choose the Apply button: “Password was changed unsuccessfully.
Page 295: Machine Settings
Machine Settings The System - Machine Settings window allows you to configure the follow- ing items: Item Description Administrator Name Specifies the name of the administrator for the printer. Range: Up to 127 characters Default: [Blank] Device Name Specifies the name of the printer. Range: Up to 127 characters Default: [Blank] Device Location...
Page 296 Item Description Do Startup Page Selects whether or not a startup page is printed when the printer is turned on. Choices: On, Off Default: Off Configuration Menu Equivalent: SYS DEFAULT MENU - STARTUP OPTIONS - DO STARTUP PAGE Auto Continue Selects whether or not printing continues if the size or type of paper in the selected paper tray is differ- ent from the size or type of paper for the print job.
Page 297 Item Description Grayscale Page Specify the operation to be performed for black-and-white pages in a job specified for color printing. If Auto is selected, printing is automatically per- formed according to the first page of the job. If Grayscale Print is selected, black-and-white printing is automatically performed depending on each page.
Page 298: Rom Version
ROM Version The System - ROM Version window provides the following information. Item Description Engine ROM Version Displays the ROM version of the printer engine. Controller ROM Ver- Displays the ROM version of the printer controller. sion Boot ROM Version Displays the ROM version of the Boot ROM.
Page 299: Maintenance
Maintenance Clear Settings The System - Maintenance - Clear Settings page allows you to reset the printer settings to its factory defaults. Item Description Printer Settings Resets the printer settings to their defaults. Configuration Menu Equivalent: SYS DEFAULT MENU - RESTORE DEFAULTS - RESTORE PRINTER Network Settings Resets the network settings to their defaults.
Page 300 Reset Printer The System - Maintenance - Reset Printer page allows you to reset the printer controller. Item Description Reset button When clicked, the message “Is it OK to reset the Printer?” appears. Click OK to automatically restart the printer. Configuring the Printer 7-81...
Page 301: Status Notification Settings
Status Notification Settings The System - Status Notification Settings window allows you to configure the following items: Item Description IP Address Notification Specify the IP address of the SNMP trap Address receiver. An IPv4 or IPv6 address or a host name can be specified. Range: Up to 63 characters Default: 0.0.0.0 Port Number...
Page 302 Item Description IPX Address Notification Specify the IPX address of the SNMP trap Address receiver. Range: 8 characters Default: 00000000 Node Address Specify the node address of the SNMP trap receiver. Range: 12 characters Default: 000000000000 Community Specify the community name for the Name SNMP trap.
Page 303 Item Description Toner Out Specifies whether or not a notification is sent when the toner is empty. Choices: Enable, Disable Default: Enable Output Tray Specifies whether or not a notification is Full sent when the output tray has become full. Choices: Enable, Disable Default: Enable Fuser Unit End Specifies whether or not a notification is...
Page 304 Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previ- ous values. Configuring the Printer 7-85...
Page 305: Job Page
Job Page This page allows you to view the status of current print jobs. Active Job List (show above) The Job - Active Job List window provides the following information for up to 49 print jobs. Item Description Job Number Displays the print job identification number.
Page 306: Done Job List
Done Job List The Job - Done Job List window provides the following information for up to 50 print jobs. Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Page 307: Done Job List (Detail)
Done Job List (Detail) The Job - Done Job List - Detail window provides the following information for the selected job. Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Page 308: Print Page
Print Page This page allows more detailed printer settings to be specified. Local Interface The Print - Local Interface window allows you to configure the following items: Item Description I/O Timeout Specifies the reception timeout (in seconds). Range: 5-300 Default: 15 Configuration Menu Equivalent: INTERFACE MENU - JOB TIMEOUT Apply button...
Page 309: Default Settings
Default Settings General Settings The Print - Default Settings - General Settings window allows you to con- figure the following items: Item Description Selects default language to be selected. Choices: Auto, PCL, PS Default: Auto Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - DEF.
Page 310 Item Description Duplex If Long-Edge Binding is selected, the pages will be printed on both sides of the paper for long-edge binding. If Short-Edge Binding is selected, the pages will be printed on both sides of the paper for short-edge binding.
Page 311 Item Description Paper Type Specifies the default setting for the type of paper. Choices: Plain Paper, Recycled, Thick 1, Thick 2, Label, Envelope, Postcard, Letterhead, Glossy 1, Glossy 2, Single Side Only, Special Paper Default: Plain Paper Configuration Menu Equivalent: SYS DEFAULT MENU - PAPER - DEFAULT PAPER - PAPER TYPE Collate...
Page 312 Paper Source Settings The Print - Default Settings - Paper Source Settings window allows you to configure the following items: Item Description Tray1 Paper Size Specifies the setting for the size of paper loaded into Tray 1. Default: Letter (120V model) A4 (Other model) Configuration Menu Equivalent: PAPER MENU - PAPER...
Page 313 Item Description Length Specifies the paper length when Paper Size is set to Custom Size. Range: 5.83 - 14.00 (inch) / 148 - 356 (mm) Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY1 - CUSTOM SIZE - LENGTH Paper Type Specifies the setting for the type of paper loaded into Tray 1.
Page 314 Item Description Tray2 Paper Size Specifies the setting for the size of paper loaded into Tray 2. Default: Letter (120V model) A4 (other model) Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY2 - PAPER SIZE Width Specifies the paper width when Paper Size is set to Custom Size.
Page 315 Item Description Tray3 Paper Size Displays the setting for the size of paper loaded into Tray 3. This item appears only if Configuration Menu Equivalent: an optional lower PAPER MENU - PAPER feeder unit SOURCE - TRAY3 - PAPER PF-P09 is SIZE installed.
Page 316 Tray Mapping Settings The Print - Default Settings - Tray Mapping Settings window provides the following information. Item Description Tray Mapping Mode Select whether or not the Tray Mapping function is used. Choices: On, Off Default: Off Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY MAPPING - TRAY MAPPING MODE...
Page 317 Item Description Logical Tray 0-9 Select the tray that is used for printing when a print job is received from another manufacturer’s printer driver. The default setting for Logical Tray 1 is Physical Tray1. The default setting for all other trays is Phys- ical Tray2.
Page 318 The Print - Default Settings - PCL Settings window allows you to configure the following items: Item Description Font Number Sets the default font in the PCL language. Range: 0 - 102 Default: 0 Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - FONT NUMBER Symbol Set...
Page 319 Item Description CR/LF Mapping Selects CR/LF code definition in PCL language. Choices: CR=CR LF=LF, CR=CRLF LF=LF, CR=CR LF=LFCR, CR=CRLF LF=LFCR Default: CR=CR LF=LF Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - PCL - CR/LF MAPPING Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values.
Page 320 PS Settings The Print - Default Settings - PS Settings window allows you to configure the following items: Item Description Wait Timeout Sets Postscript timeout. “0” means that no time-out control is effective. Range: 0 - 300 (in seconds) Default: 0 Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - POSTSCRIPT - WAIT TIMEOUT...
Page 321 Item Description Auto Trapping Select whether or not neighboring colors are printed superimposed in order to prevent white space around images. Choices: On, Off Default: Off Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - POSTSCRIPT - AUTO TRAPPING Black Overprint Specify whether black objects are printed (superim- posed) on a neighboring color in order to prevent white space around black characters or figures.
Page 322 XPS Settings The Print - Default Settings - XPS Settings window allows you to configure the following items: This page appears only if a hard disk kit HD-P03 or a CompactFlash card is installed. Item Description Digital Signature Specify whether to verify digital signature. When Enable is selected, the document without a valid digital signature is not printed.
Page 323 Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Print Quality Settings The Print - Default Settings - Print Quality Settings window allows you to configure the following items: Item Description Print...
Page 324 Item Description Color Separation If On is selected, color separation is per- formed. If Off is selected, color separation is not per- formed. Choices: On, Off Default: Off Configuration Menu Equivalent: QUALITY MENU - COLOR SEPARATION Brightness Specifies the brightness of the printed image.
Page 325 Item Description Edge Enhance- Select whether image/text/graphics edges ment (Image/Text/ are emphasized. Graphics Printing) If On is selected, the edges are empha- sized. If Off is selected, the edges are not empha- sized. Choices: On, Off Default: Off (Image) On (Text / Graphics) Configuration Menu Equivalent: QUALITY MENU - EDGE ENHANCEMENT –IMAGE/...
Page 326 Item Description Contrast Specifies the contrast of the image. Settings Choices: +15%, +10%, +5%, 0, -5%, -10%, -15% Default: 0 Configuration Menu Equivalent: QUALITY MENU - PCL SETTING - CONTRAST Image/Text/ Specifies the color space for RGB data. Graphics Printing Choices: Device Color, sRGB (Source) Default: sRGB...
Page 327 Item Description Image/Text/ Specifies the color space for RGB data. Settings Graphics Printing Choices: Device Color, sRGB, AppleRGB, (RGB Source) AdobeRGB1998, ColorMatchRGB, BlueAdjustRGB, Custom Profile Default: sRGB Configuration Menu Equivalent: QUALITY MENU - PS SETTING - IMAGE/TEXT/ GRAPHICS PRINTING - RGB SOURCE Image/Text/ Specifies the color intent to be used on con-...
Page 328 Item Description Image/Text/ Specifies the ICC destination profile to be Graphics Printing used for printed output. (Destination Pro- Choices: Auto, Custom Profile file) Default: Auto Configuration Menu Equivalent: QUALITY MENU - PS SETTING - IMAGE/TEXT/ GRAPHICS PRINTING - DESTINATION PROF Simulation (Pro- Specifies the specific ICC simulation profile file)
Page 329 Item Description Calibration Tone Calibration If On is indicated, image adjustments are Settings applied. If Off is indicated, image adjustments are not applied. Choices: On, Off Default: On Configuration Menu Equivalent: QUALITY MENU - CALIBRATION - TONE CALIBRATION Cyan/Magenta/ Specifies the density of the highlight color. Yellow/Black Den- Choices: +3, +2, +1, 0, -1, -2, -3 sity (Highlight)
Page 330 Item Description Clear button Resets all configuration settings to previous values. Configuring the Printer 7-111...
Page 331: Download Font/Form
Download Font/Form This page appears only if a hard disk kit HD-P03 or a CompactFlash card is installed. PS Font The printer must have an optional hard disk kit HD-P03 or Compact- Flash card to use the PS Font parameters described below. The Print - Download Font/Form - PS Font window allows you to configure the following items: Item...
Page 332 Item Description Delete button Deletes the PostScript font file(s) whose check boxes the left end are checked. Form Overlay The Print - Download Font/Form - Form Overlay window allows you to configure the following items: Item Description Download Form Radio button Specifies the download destination (HDD/ Overlay Memory Card) of the form overlay file.
Page 333 Item Description Source Displays the storage source of the form overlay. Delete button Deletes the form overlay file(s) whose check boxes the left end are checked. Color Profile The Print - Download Font/Form - Color Profile window allows you to con- figure the following items: Item Description...
Page 334 Item Description Profile Name Displays the name of the color profile. Class Displays the type of color profile. Color Space Displays the color space for the color pro- file. Source Displays the storage source of the color profile. Delete button Deletes the color profile file(s) whose check boxes the left end are checked.
Page 335: Network Page
Network Page This page allows you to configure network settings. For more information on these protocols, see Chapter 6 “Network Printing” 7-116 Configuring the Printer...
Page 336: Tcp/Ip
TCP/IP TCP/IP (shown above) The Network - TCP/IP - TCP/IP window allows you to configure the following items. For more information on these TCP/IP, see Chapter 6 “Network Print- ing” Item Description TCP/IP Sets whether or not to use TCP/IP. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent:...
Page 337 IPv4 Settings The Network - TCP/IP - IPv4 Settings window allows you to configure the following items. For more information on these TCP/IP, see Chapter 6 “Net- work Printing” Item Description Auto IP Specifies the automatic assigning method for the printer IP address.
Page 338 Item Description IP Address* Sets the printer’s IP address. Range: 0–255 for each xxx triplet Default: 0.0.0.0 If the specified IP address is outside of the allowable range, the value is not changed, even after the Apply button is clicked. The setting returns to the previous value.
Page 339 Item Description DNS Server Select whether or not the DNS server address is Automatic Acqui- automatically acquired from the DHCP server to overwrite sition the current setting. Choices: Enable, Disable Default: Enable Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values.
Page 340 IPv6 Settings The Network - TCP/IP - IPv6 Settings window allows you to configure the following items. For more information on these TCP/IP, see Chapter 6 “Net- work Printing” Item Description IPv6 Select whether or not IPv6 is used. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/...
Page 341 Item Description IPv6 Link Local Displays IPv6 Link Local Address. Address Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - IPv6 - LINK LOCAL IPv6 Global Specifies the IPv6 Global Address. Address Range: 4 to 43 characters Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - IPv6 - GLOBAL ADDRESS When IPv6 Auto Setting is set to ENABLE, this...
Page 342 Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Configuring the Printer 7-123...
Page 343 RAW Port Settings The Network - TCP/IP - RAW Port Settings window allows you to configure the following items. For more information on these TCP/IP, see Chapter 6 “Network Printing” Item Description Raw Port Select whether or not RAW port is used. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent:...
Page 344 Item Description RAW Port Select whether or not the RAW Port bidirectional is used. Bidirectional Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - RAW PORT - BIDIRECTIONAL Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values.
Page 345 DNS Settings The Network - TCP/IP - DNS Settings window allows you to configure the following items. For more information on these TCP/IP, see Chapter 6 “Net- work Printing” Item Description Host Name Specifies the host name. Range: Up to 63 characters Default: BHC35P-xxxxxx xxxxxx displays six last digits of the MAC address in hexadecimals.
Page 346 Item Description Specifies the DNS server. Server(IPv4) A maximum of three IPv4 addresses can be specified. Default: 0.0.0.0 Specifies the DNS server. Server(IPv6) A maximum of three IPv6 addresses can be specified. Default: :: Search Domain Specifies the DNS Search Domain. Name A maximum of three FQDN (fully qualified domain names) can be specified.
Page 347 IP Address Filtering The Network - TCP/IP - IP Address Filtering page allows you to specify the IP address and limitations for accessing the printer. The settings described below are not applied to the DNS server and DHCP server. If the range of permitted IP addresses in Access Permission Address overlaps the range of refused IP address in Access Refuse Address, the refuse setting of Access Refuse Address is given pri- ority.
Page 348 Item Description Access Permis- If Enable is selected, the range of IP addresses permitted sion Address access to the printer can be specified. A maximum of five ranges of permitted IP addresses can be specified. In addition, access from an IP address out of the specified range is prohibited.
Page 349 Item Description Access Refuse If Enable is selected, the range of IP addresses refused Address access to the printer can be specified. A maximum of five ranges of refused IP addresses can be specified. If Disable is selected, the refused access setting is disabled.
Page 350 IPsec The Network - TCP/IP - IPsec window allows you to configure the following items. For more information on these TCP/IP, see Chapter 6 “Network Print- ing” Item Description Generic IPsec Displays whether to enable or disable the Settings IPsec function. IKE Life Time Display the IKE Life Time.
Page 351 Item Description IKE Settings /IPsec SA Set- Click this icon to display the settings page. tings /IPsec Peer Settings (Edit icon) IKE Settings /IPsec SA Set- Click this icon to delete the settings. tings /IPsec Peer Settings (Delete icon) IPsec (General Settings) 7-132 Configuring the Printer...
Page 352 The Network - IPsec - General Settings window allows you to configure the following items. Item Description IPsec Select whether to enable or disable the IPsec function. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - IPSEC - ENABLE IKE Life Time Specifies the IKE Life Time (in seconds).
Page 353 IPsec (IKE Settings) The Network - IPsec - IKE Settings window allows you to configure the fol- lowing items. Item Description Displays the number (No.) to be registered. Encryption Algo- Select the encryption algorithm to be used when creating rithm a control tunnel.
Page 354 Item Description Cancel button Click to cancel the entered data and return to the Network - TCP/IP - IPsec page. IPsec (IPsec SA Settings) The Network - IPsec - IPsec SA Settings window allows you to configure the following items. Item Description Displays the number (No.) to be registered.
Page 355 Item Description Encryption Algo- When ESP is selected for Security Protocol, specify the rithm for ESP ESP encryption algorithm. Choices: None, DES-CBC, 3DES-CBC, AES-CBC, AES-CTR Default: None Authentication When ESP is selected for Security Protocol, specify the Algorithm for ESP authentication algorithm. Choices: None, MD5, SHA-1 Default: None Authentication...
Page 356 IPsec (IPsec Peer Settings) The Network - IPsec - IPsec Peer Settings window allows you to configure the following items. Item Description Displays the number (No.) to be registered. Perfect Forward To increase the IKE strength, select Use. Secrecy Choices: Not Use, Use Default: Not Use Peer’s Address Specify the IP address of the peer.
Page 357: Bonjour
Item Description Encapsulation Specify the operation mode of IPsec. Mode Choices: Not Use, Tunnel Mode, Transport Mode Default: Not Use Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Cancel button Click to cancel the entered data and return to the Network - TCP/IP - IPsec page.
Page 358 Description Bonjour Name Specify the Bonjour name for the printer. Range: 1 to 63 characters Default: KONICA MINOLTA bizhub C35P(xx:xx:xx) “xx:xx:xx” refers to the last six digits of the MAC address (in hexadecimal). Priority Protocol Specify the connection protocol given priority with Bonjour.
Page 359: Wsd
The Network - WSD window allows you to configure the following items: Item Description WSD Print Select whether to enable or disable the WSD print function. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - WSD PRINT - ENABLE Secure Mode Select whether or not WSD communication is performed...
Page 360 Item Description Device Name Displays the Device name. Default: KONICA MINOLTA bizhub C35P(xx:xx:xx) Specify the settings from the System - Machine Settings page. Device Location Displays the Device location. Default: [Blank] Specify the settings from the System - Machine Settings page.
Page 361: Lltd
LLTD The Network - LLTD window allows you to configure the following items: Item Description LLTD Select whether to enable or disable the LLTD function. Choices: Enable, Disable Default: Enable Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values.
Page 362: Netware
NetWare NetWare The Network - NetWare - NetWare window allows you to configure the fol- lowing items Item Description NetWare NetWare Print Enables or Disables the NetWare print option. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - NETWARE - ENABLE Configuring the Printer...
Page 363 Item Description Frame Type Specifies the Frame Type. Choices: Auto, Ethernet 802.2, Ethernet 802.3, Ethernet II, Ethernet SNAP Default: Auto Mode Specifies the NetWare Configuration mode. Choices: Disable, PServer, NPrinter/ RPrinter Default: Disable PServer Print Server Sets the Print Server Name for the printer. Name Range: 1 to 63 characters Default: BHC35P-xxxxxx...
Page 364 Item Description Preferred NDS Sets the Preferred NDS Context for the Context Name printer. Range: Up to 191 characters Default: [Blank] Preferred NDS Sets the Preferred NDS Tree for the Tree Name printer. Range: Up to 63 characters Default: [Blank] NPrinter/ Printer Name Sets the printer’s name.
Page 365 NetWare Status The Network - NetWare - NetWare Status window allows you to configure the following items: Item Description File Server Identifies current NetWare File Server. Queue Name Identifies current NetWare queue name. Queue Status Identifies current NetWare status. 7-146 Configuring the Printer...
Page 366: Ipp
The Network - IPP window allows you to configure the following items. For details on IPP, refer to Chapter 6 “Network Printing” In order to apply the set- tings, the printer must be turned off, then on again after the setting is speci- fied.
Page 367 Sets whether or not to accept IPP Job. Choices: Enable, Disable Default: Enable Printer Name Displays the printer’s name. Range: Up to 127 characters Default: KONICA MINOLTA bizhub C35P(xx:xx:xx) Specify the settings from the System - Machine Settings page. Printer Location Displays the printer’s location.
Page 368 Item Description Operational Print Job If this check box is selected, Print Job is Support enabled. Default: Checked Validate Job If this check box is selected, Validate Job is enabled. Default: Checked Cancel Job If this check box is selected, Cancel Job is enabled.
Page 369 Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. 7-150 Configuring the Printer...
Page 370: Ftp
Server The Network - FTP - Server window allows you to configure the following items: Item Description FTP Server Enables or Disables the FTP server. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/IP - FTP - ENABLE Apply button Applies the configuration settings for this window.
Page 371: Snmp
SNMP The Network - SNMP window allows you to configure the following items: Item Description SNMP SNMP If Enable is selected, SNMP is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/IP - SNMP - ENABLE SNMP v1/ If Enable is selected, SNMP v1/v2c(IP) is enabled.
Page 372 Item Description SNMP If Enable is selected, SNMP v1(IPX) is enabled. v1(IPX) Choices: Enable, Disable Default: Enable UDP Port Specifies the UDP port number. Range: 1 - 65535 Default: 161 SNMP v1/ Read Specifies the community name to be used for scan- v2c/(IP) Commu- ning.
Page 373 Item Description Read Specifies the security level for read only user. Security Choices: None, Auth-password, Auth-password/ Level Priv-password Default: Auth-password/Priv-password Read Specifies the read only user authentication pass- Auth-pass- word to be used for authentication. word Range: 8 to 32 characters Default: AuthPassword Read Specifies the read only user privacy password to be...
Page 374 Item Description Trap Set- Allow Set- Specifies whether or not to permit the Trap settings tings ting Choices: Allow, Restrict Default: Allow Trap Set- Specifies whether to enable or disable the Trap set- ting When tings when authentication failed. Authenti- Choices: Enable, Disable cation Default: Disable...
Page 375: Appletalk
AppleTalk The Network - AppleTalk window allows you to configure the following items: Item Description AppleTalk If Enable is selected, AppleTalk is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - APPLETALK - ENABLE Printer Name Sets the printer name.
Page 376: Email
Item Description Clear button Resets all configuration settings to previous values. Email Send Email The Network - Email - Send Email window allows you to configure the fol- lowing items: Item Description Send Send If Enable is selected, sending Email is enabled. Email Choices: Enable, Disable Default: Enable...
Page 377 Item Description Port Num- Specifies the port number of the mail transmission server. Range: 1 - 65535 Default: 25 Connec- Specifies the amount of time until the connection tion Time- times out when sending e-mail. Range: 30 - 300 (seconds) Default: 60 SMTP SMTP...
Page 378: Ssl/Tls
SSL/TLS SSL/TLS Information The Network - SSL/TLS - SSL/TLS Information page allows you to specify SSL/TLS settings. As a default, SSL/TLS is not installed. Click Setting to create a certifi- cate and specify the SSL settings. Item Description Setting button Displays the SSL/TLS Setting page.
Page 379: Ssl/Tls Setting (When A Certificate Is Not Installed)
SSL/TLS Setting (When a certificate is not installed) The Network - SSL/TLS - SSL/TLS Setting page allows you to select the fol- lowing SSL/TLS settings that appear. Item Description Create a self-signed Creates a self-signed certificate. Certificate Request a certificate Creates data for requesting that a certificate be issued from a certificate authority.
Page 380: Ssl/Tls Setting (When A Certificate Is Installed)
SSL/TLS Setting (When a certificate is installed) The Network - SSL/TLS - SSL/TLS Setting page allows you to select the fol- lowing SSL/ TLS settings that appear. Item Description Set a Encryption Specifies the encryption level. In addition, SSL/TLS Strength can be disabled.
Page 381: Self-Signed Certificate Setting
Self-signed Certificate Setting The Network - SSL/TLS - Self-signed Certificate Setting page allows you to create a certificate and specify SSL settings. Item Description Common Name Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is com- prised of “Printer Host Name.
Page 382 Item Description Locality Specify the name of the municipality. Range: 1 to 127 characters Default: [Blank] State/Province Specify the name of the state or province. Range: 1 to 127 characters Default: [Blank] Country Specify the name of the country as a country code regulated by ISO03166.
Page 383: Request A Certificate
Request a certificate The Network - SSL/TLS - Request a Certificate page allows you to config- ure the following items: Item Description Common Name Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is com- prised of “Printer Host Name.
Page 384 Item Description State/Province Specifies the name of the state or province. Range: 1 to 127 characters Default: [Blank] Country Specify the name of the country as a country code regulated by ISO03166. Range: 2 characters Default: [Blank] Email Address Specify the e-mail address. Range: 1 to 127 characters Default: [Blank] Next button...
Page 385: Certificate Request
Certificate Request The Network - SSL/TLS - Certificate Request page displays the data that will be submitted to the certificate authority to request that a certificate be issued. Item Description Certificate Request Displays the data that should be submitted to the certificate signing authority.
Page 386: Install A Certificate
Install a Certificate The Network - SSL/TLS - Install a Certificate page allows you to install the certificate issued by the certificate authority. Item Description Install a Certificate Signed CSR (Certificate Signing Request) should be pasted to this text area. Next button Click to display the Network - SSL/TLS - Encryp- tion Strength Setting page.
Page 387: Encryption Strength Setting
Encryption Strength Setting This menu item appears if a certificate is installed. The Network - SSL/TLS - Encryption Strength Setting page allows you to specify the encryption level. Item Description Encryption Strength Specify the encryption level. Choices: AES_256bits, 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits...
Page 388: Remove A Certificate
Item Description Cancel button Click to return to the Network - SSL/TLS - SSL/ TLS Information page. Remove a Certificate This menu item appears if a certificate is installed. The Network - SSL/TLS - Remove a Certificate page allows you to delete the installed certificate.
Page 389: Mode Using Ssl/Tls
Mode Using SSL/TLS This menu item appears if a certificate is installed. The Network - SSL/TLS - Mode Using SSL/TLS page allows the SSL trans- mission mode to be specified. Item Description Mode using SSL/TLS Selects the SSL transmission mode. Choice: Disable, Enable Default: Disable Apply button...
Page 390: Authentication
Authentication User Authentication The Network - Authentication - User Authentication page allows you to specify user authentication settings. This page appears only if a hard disk kit HD-P03 or a CompactFlash card is installed. When User Authentication or Account Track is set to On and Pub- lic Access is set to Restrict on this page, printing is not possible except from a host where authentication settings can be specified (Windows printer driver or PageScope Direct Print).
Page 391 Item Description Public Access Select whether or not logon as a Public user is per- mitted when authentication settings have been speci- fied. Choices: Allow, Restrict Default: Allow Account Track Select whether or not account authentication is per- formed. Choices: On, Off Default: Off Account Track Specify the account track authentication method.
Page 392 Auto Logout Network - Authentication - Auto Logout window allows you to configure the following items. Item Description Admin. Mode Logout Specify the length of time to automatically log off Time from Administrator mode. Range: 1 - 60 (Minutes) Default: 10 User Mode Logout Specify the length of time to automatically log off Time...
Page 393 IEEE802.1x The Network - Authentication - IEEE802.1x window allows you to configure the following items: Item Description IEEE802.1x Select whether to enable or disable the IEEE802.1x function. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - IEEE802.1X - ENABLE EAP Type Select the type of authentication used with...
Page 394 Item Description User ID Specifies the account name, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP or Server Specification. Range: Up to 128 characters Default: [Blank] Password Specifies the password, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP or Server Specification.
Page 395 Item Description Client Certificate Shows whether or not a client certificate has been specified. Specify the settings from the Network - SSL/ TLS page. CA Certificate Shows whether or not a CA certificate has been specified for CA reliability verification of server cer- tificates.
Page 396 CA Certificate CA Certificate Information The Network - Authentication - CA Certificate - CA Certificate Informa- tion window allows you to specify CA Certificate settings. As a default, CA Certificate is not installed. Click Setting to create a certificate and specify the CA Certificate settings. Item Description Setting button...
Page 397 CA Certificate Setting (When a certificate is installed) The Network - Authentication - CA Certificate - CA Certificate Setting page allows you to select the following CA Certificate settings that appear. Item Description Remove a Certificate Removes the certificate. Next button Click to display the selected page.
Page 398 CA Certificate Setting (When a certificate is not installed) The Network - Authentication - CA Certificate - CA Certificate Setting page allows you to select the following CA Certificate settings that appear. Item Description Install a Certificate Installs the certificate issued by the certificate authority.
Page 399 Install a Certificate The Network - Authentication - CA Certificate - Install a Certificate page allows you to install the certificate issued by the certificate authority. Item Description Install a Certificate Signed CSR (Certificate Signing Request) should be pasted to this text area. Next button Click to display the Network - Authentication - CA Certificate - Install a Certificate page.
Page 400 Remove a Certificate The Network - Authentication - CA Certificate - Remove a Certificate page allows you to delete the installed certificate. Item Description OK button Click to display a confirmation message. Click OK in the confirmation message to delete the certificate. Back button Click to return to the Network - Authentication - CA Certificate - CA Certificate Setting page.
Page 401 7-182 Configuring the Printer...
Page 402: A Appendix
Appendix...
Page 403 Encryption strength setting ..7-168 FTP ........7-151 Account Mode .......7-9 Install a certificate ....7-167 Account Mode, PageScope Web LLTD ........7-142 Connection ......7-9 Mode using SSL/TLS ..... 7-170 Active job list, PageScope Web NetWare ......... 7-143 Connection Remove a certificate ....7-169 Print job status ......7-28 Request a certificate ....
Page 404 Gateway ........5-6 Installing HTTP ..........5-7 Certificate ....7-167, 7-180 IEEE802.1x .......5-12 Download manager utility ... 4-2 IP address ........5-5 Management information base ... 4-2 IP address filter ......5-10 PageScope Data Administrator IPP ..........5-8 ............ 4-2 IPsec .........5-10 Printer driver ......1-3, 2-2 IPv6 ...........5-11 Printer Management Utilities ..
Page 405 System requirements ....2-2 IPv6 settings ......7-121 Troubleshooting ......2-19 RAW port settings ....7-124 LLMNR .........6-11 LLTD .........6-12, 7-142 LLTD, PageScope Page setup settings ....1-63 Web Connection ....7-142 Custom paper size options ..1-65 Local interface, PageScope Web Page attributes options .... 1-64 Connection ......7-89 PageScope LPD/LPR ........6-12...
Page 406 IPsec Peer settings ....7-137 WSD ........7-140 IPsec SA settings ....7-135 XPS settings ....7-38, 7-103 IPv4 settings ......7-118 Paper source settings, PageScope IPv6 settings ......7-121 Web Connection ..7-33, 7-93 Job log ........7-49 Password, PageScope Web LLTD ........7-142 Connection ......7-74 Local interface ......7-89 PCL font, PageScope Web Login page ........7-9...
Page 407 HTTP ........6-10 SSL/TLS information, PageScope IPP ..........6-11 Web Connection ....7-159 IPv6 ...........6-11 SSL/TLS setting, PageScope Web IPX/SPX ........6-11 Connection ......7-160 LLMNR ........6-11 Status monitor ......4-2 LLTD .........6-12 Subnet mask ......5-5, 6-3 LPD/LPR ........6-12 Manual setting ......6-5 SLP ...........6-12 System Preference SMTP ........6-13...
Page 408 XPS settings, PageScope Web Connection ....7-38, 7-103 Appendix...
Page 409 Appendix...

Konica Minolta bizhub C35P Reference Manual

1 Operation on Mac os X

System Requirements for the Printer Driver

Installing the Printer Driver

Uninstalling the Printer Driver

Print Center Settings (Mac os X 10.2.8)

Printer Setup Utility Settings (Mac os X 10.3)

Printer Setup Utility Settings (Mac os X 10.4)

Printer Settings (Mac os X 10.5/10.6)

Selecting Print Options

Specifying Page Setup Settings (Mac os X 10.2/10.3/10.4/10.5/10.6)

Specifying Print Settings (Mac os X 10.4)

Specifying Print Settings (Mac os X 10.5/10.6)

Specifying the Color Profile

Troubleshooting

2 Operation on Linux

System Requirements for the Printer Driver

Installing PPD File from the Command Line

Adding the Printer Using Printer Configuration

Adding the Printer on the CUPS Administration Web Page

Specifying Printer Driver Settings

Printing a Document

Checking Print Jobs

Troubleshooting

3 Operation on Netware

Printing with Netware

4 Printer Utilities

Installing Printer Utilities on Windows

5 Understanding the Ethernet Configuration Menus

Ethernet Menu

6 Network Printing

Network Connection

Network Printing

Troubleshooting

7 Using Pagescope Web Connection

About Pagescope Web Connection

Setting up the Printer Web Page

Understanding the Pagescope Web Connection Window

Logging on to Pagescope Web Connection

Viewing Printer Status

Configuring the Printer

A Appendix

Quick Links

Reference Guide

Troubleshooting

Related Manuals for Konica Minolta bizhub C35P

Summary of Contents for Konica Minolta bizhub C35P