Gradation; Supplies; Replace-Trans. Belt; Replace-Trans. Roller - Konica Minolta bizhub C35P Service Manual

Field Service Ver. 1.0 May 2010
10.7.8

GRADATION

A. Use
• Prints the gradation pattern.
• To check the gradation reproductively.
B. Procedure
1. Set the A4 or Letter paper on the tray.
2. Call [SERVICE MENU] to the display.
3. Select [PRINT MENU] → [GRADATION] and press the Menu/Select key.
4. Select [PRINT] and press the Menu/Select key.

10.8 SUPPLIES

10.8.1

REPLACE-TRANS. BELT

A. Use
• Resets the transfer belt unit counter.
• To use when the transfer belt unit has been replaced.
B. Procedure
1. Call [SERVICE MENU] to the display.
2. Select [SUPPLIES] → [REPLACE] → [TRANS. BELT], and select "YES."
3. Press the Menu/Select key and reset the counter.
10.8.2

REPLACE-TRANS. ROLLER

A. Use
• Resets the transfer roller unit counter.
• To use when the transfer roller unit has been replaced.
B. Procedure
1. Call [SERVICE MENU] to the display.
2. Select [SUPPLIES] → [REPLACE] → [TRANS. ROLLER], and select "YES."
3. Press the Menu/Select key and reset the counter.
10.8.3

REPLACE-FUSER UNIT

A. Use
• Resets the fusing unit counter.
• To use when the fusing unit has been replaced.
B. Procedure
1. Call [SERVICE MENU] to the display.
2. Select [SUPPLIES] → [REPLACE] → [FUSER UNIT], and select "YES".
3. Press the Menu/Select key and reset the counter.
10. SERVICE MODE
115