Konica Minolta bizhub C35P Service Manual page 186

Field Service Ver. 1.0 May 2010
LCD1 LCD2/LCD3
(service (error descrip-
call ID) tion)
0F52 TE SENSOR
Y
0F53 TE SENSOR
M
0F54 TE SENSOR
C
0F55 TE SENSOR
K
13DD EEPROM BK
13E2 FLASH
WRITE
13E3 FLASH
DEVICE
13F0 ENGINE ERR Engine control failure
3C00 EEPROM1
3C10 EEPROM2
C002 RAM ERROR RAM error at startup
C003 RAM ERROR RAM error at startup
C013 H/W
ADDRESS
C015 BOOT ROM
C025 CONTROL-
LER ROM
C026
C027
C050 HDD ERROR HDD access error
C051 HDD DISK
FULL
C052 CARD
ERROR
C053 CARD FULL
Item
Toner level sensor /Y • An error occurs on the toner level sensor for
malfunction
Toner level sensor /M
malfunction
Toner level sensor /C
malfunction
Toner level sensor /K
malfunction
Backup data error • The engine counter data and the controller
Flash ROM write error • Flash ROM writing is found faulty during a
Flash ROM device • An erase error occurs during erasing of data in
fault
• An undefined malfunction occurs in the engine
Trouble related to • Contact the responsible people of KONICA
security
• RAM error at standard memory is detected dur-
(standard memory)
• RAM error at expanded memory is detected dur-
(expanded memory)
MAC address error at • Invalid MAC address is detected during printer
startup
Boot ROM error at • Boot ROM error is detected during printer start-
startup
Controller ROM error • Lead error of destination setting file is detected
(Configuration infor-
mation error)
Controller ROM error • Flash ROM access error is detected during the
(Access error)
Controller ROM error • Final check sum error is detected during the
(Data error)
• When correct access to the hard disk kit is failed
HDD full error • Range for user space is full during access to the
Compact flash access • When correct access to the compact flash card
error
Compact flash full • Range for user space is full during access to the
error
13. MALFUNCTION CODE
Detection timing
each color.
counter data are inconsistent.
check.
flash ROM.
section (PRCB, etc.).
While the machine is operating, if it detects
defective conditions, e.g. the next print is not
started after the lapse of a given period of time,
it stops operating and the trouble code is dis-
played.
MINOLTA when not returning in power switch
OFF/ON.
ing printer start-up.
ing printer start-up.
start-up.
up.
during the printer starting.
printer starting.
printer starting.
during access.
hard disk kit.
is failed during access.
compact flash card.
151