Konica Minolta bizhub C35P Service Manual page 156

Field Service Ver. 1.0 May 2010
Two-way communication
Step
10 Setting the http server
1. Select [SERVICE MENU]→[CS REMOTE CARE]→[BASIC SETTING]→[WEB SERVER]
2. Input the IP address or FQDN of the CS Remote Care center, and press the Menu/Select key.
When the WebDAV server of the CS Remote Care center is operated with IIS (Internet Informa-
tion Service) Ver7.0 or later, it is necessary to add the port number to the host address.
Refer to the followig sample and make sure to set the appropriate address.
<Conditions precedent of the sample>
• Server address: 192.168.0.1/WebDAV
• Port number: default setting (HTTP;80/HTTPS;443)
Connect without
a proxy server
Connect using a
proxy server *
.
*: When using proxy server at HTTP connection, no adding ":80" is required.
3. Select [SERVICE MENU]→[CS REMOTE CARE]→[WEBDAV SETTING], and make the set-
tings of communication with the server according to the network environment.
See P.123
11 Enables/disables some special warning and report functions
1. Select [SERVICE MENU]→[CS REMOTE CARE]→[CSRC SETTING]→[SWITCHES SET-
TINGS], and set whether or not to enable each function.
See P.126
12 Executing the initial transmission
1. Select [SERVICE MENU]→[CS REMOTE CARE]→[SUBSCRIBE].
2. Select [YES], and press the Menu/Select key to start initial transmission.
3. When the machine is properly connected with the center, the "Completed" message will be
displayed.
*1: Heartbeat is a feature that uploads a Heartbeat file to the registered web server at a
specified interval to report that the device is operating. Heartbeat files include total
counter and status information.
Procedure
HTTP
192.168.0.1:80/WebDAV
192.168.0.1/WebDAV
10. SERVICE MODE
One-way communication
HTTPS
192.168.0.1:443/WebDAV
192.168.0.1:443/WebDAV
121