Comp. Check - Konica Minolta bizhub C35P Service Manual

Field Service Ver. 1.0 May 2010
10.16.2

COMP. CHECK

A. Use
• Checks the operation of each electrical component.
• The electrical components which can be checked are as follows.
Name
LV FAN (H-S)
DUP FAN (H-S)
DUP FAN (M-S)
POLYGON MOTOR
TRAY 3 FEED MOTOR
COLOR PC MOTOR
DEV MOTOR K
DEV MOTOR YMCK
TRAY 2 FEED CLUTCH
TRAY 1 FEED CLUTCH
SYNC ROLLER CLUTCH
2ND TRANS CLUTCH
1ST TRANS CLUTCH
TRAY 3 FEED CLUTCH
TONER CLUTCH Y
TONER CLUTCH M
TONER CLUTCH C
TONER CLUTCH K
DUP NORMAL CLUTCH
DUP REV CLUTCH
DUP FEED CLUTCH
MAIN MOTOR
NOTE
• Any component does not operate in the event of jam or when a cover is open.
• When making the developing motor or the registration clutch driven, be sure to
install the waste toner bottle.
B. Procedure
1. Call [SERVICE MENU] to the display.
2. Select [Function]→[Comp. Check].
3. Select the electrical component of which operation is checked.
4. Select [EXECUTE], and press the Menu/Select key.
The corresponding component starts to operate.
5. If the component is the one which can be stopped during its operation, you can select
[STOP] to stop the operation.
NOTE
• When the COMP. CHECK function has been executed, turn OFF the power switch
and reboot the machine.
Electric parts name
DC power supply fan motor (High speed)
Cooling fan motor (High speed)
Cooling fan motor (Half speed)
Polygon motor
Tray 3 media feed motor
Color PC drum motor
Developing motor (reverse rotation)
Developing motor (normal rotation)
Tray 2 media feed clutch
Tray 1 media feed clutch
Registration clutch
2nd transfer release solenoid
1st transfer release solenoid
Tray 3 media feed clutch
Toner supply clutch/Y
Toner supply clutch/M
Toner supply clutch/C
Toner supply clutch/K
Switchback roller feed clutch
Switchback roller reverse clutch
Duplex conveyance roller clutch
Main motor
10. SERVICE MODE
Symbol
FM10
FM11
M5
M1
M4
M1
M1
CL1
CL2
CL3
SD2
SD1
CL1
CL4
CL5
CL6
CL7
CL11
CL12
CL13
M2
131