Deleting A Special Sender - Ricoh C2408 Operating Instructions Manual

E Press [# # # # ].
The size you selected is shown.
F Enter the horizontal size of the
paper with the number keys.
Note
❒ The method to program or
change Bypass Tray Paper
Size for Copy Function is dif-
ferent from that of Fax Func-
tion.
❒ You can specify a horizontal
size from 148 mm (5.8 inch)
to 457 mm (18.0 inch). You
cannot enter a size smaller
than 148 mm or larger than
457 mm.
❒ Each time you press [mm] or
[inch], the units change be-
tween "mm" and "inch" al-
tern ately. I f y ou en ter a
length and change the unit
by pressing [mm] or [inch],
the length is converted auto-
matically according to the
unit (fractions are rounded
off).
G Press [# # ]. # #
The size you selected is shown.
H Press [OK].
C C C C
Press [Exit].
Return to the initial display.
Using Key Operator Settings

Deleting a Special Sender

Use this function to program "Initial
Set Up" of a Special Sender. Also the
Bypass Tray Paper Size can be speci-
fied.
Press the { { { { User Tools/Counter/Inquiry} } } }
key. See p.9 "Control Panel", Facsimile
Reference (option) <Basic Features>.
And then press [Facsimile Features] ⇒
[Key Operator Tools] ⇒ [Program Special
Sender].
A A A A
Press [Delete] and select a Special
Sender you want to delete.
B B B B
Press [Delete].
A Special Sender is deleted and
"*Not Programed" is shown.
Return to the initial display.
8
123