Key Operator Setting; Function List - Ricoh C2408 Operating Instructions Manual

8. Key Operator Setting

Function List

Function name
Transmission Page Count
Forwarding
Memory Lock Reception
ECM
Parameter Setting
Program Special Sender
Box Setting
Transfer Report
Program Confidential ID
Program Polling ID
Program Memory Lock ID
Description
Check the transmission and
reception, and totals on the
display.
Transfers received messages
to a registered receiver (for-
warding destination).
Switch the Memory Lock to on
or off. To use it, register an ID
for printing a message re-
ceived in Memory Lock mode.
If a part of the transmission
fails due to a telephone line
fault, this function resends the
failed part automatically.
Allows you to change and
print the function settings to
meet your needs.
By programming particular
receivers as Special Sender in
advance, you can have the
Special Senders to treated dif-
ferently.
By using SUB and SEP Codes
with these functions, you can
send messages to another par-
ty's box and retrieve messages
stored in boxes.
Before using Transfer Re-
quest, you need this Transfer
Report setting.
Register an ID required for
Confidential communication.
Register an ID required for
Polling communication.
Register an ID required for
Memory Lock reception.
Reference
See p.109 "Counters".
See p.109 "Forwarding".
See p.111 "Memory Lock".
See p.112 "ECM".
See p.113 "Changing the User
Parameters".
See p.120 "Programming /
Changing Special Senders".
See p.124 "Box Settings".
See p.131 "Transfer Report".
See p.132 "Programming a
Confidential ID".
See p.133 "Programming a
Polling ID".
See p.133 "Programming a
Memory Lock ID".
107