Troubleshooting; If Your Machine Does Not Operate As You Want; General - Ricoh C2408 Operating Instructions Manual

If Your Machine Does Not Operate as You
Want

General

Machine Status
Please wait.
The display panel is off.
Nothing happens when the
operation switch is turned
on.
Memory is full.
The function status indica-
tor is red.
The user code entry dialog
box is displayed.
"Self checking.", "Color is
being adjusted." appears.

6. Troubleshooting

Problem/Cause
This message appears
when you turn on the oper-
ation switch or change the
toner bottle.
The screen contrast knob is
turned to the dark position.
The machine is in Panel Off
mode or Energy Saver
mode.
The operation switch is
turned off.
The main power switch is
turned off.
The number of scanned
pages, the number of files,
or capacity of the hard disk
has exceeded.
The function associated
with the red indicator has
been interrupted.
Users are restricted by user
management.
The machine is preforming
image adjustment opera-
tions.
Action
Wait for the machine to get ready.
Set the screen contrast knob to the
light position for proper viewing of
the display panel.
Press the { { { { Energy Saver} } } } key to can-
cel Energy Saver mode.
Turn on the operation switch.
Turn on the main power switch.
Press [Delete File] to delete unneces-
sary documents.
Press the function key correspond-
ing to the indicator. Follow the in-
structions displayed in the
operation panel.
Enter the user code (up to 8 digits),
and press [#].
The machine may perform periodic
maintenance during operations. The
frequency and duration of mainte-
nance depends on the humidity,
temperature, and printing factors
such as number of prints, paper
size, and paper type. Wait for the
machine to get ready.
111