Troubleshooting; If Your Machine Does Not Operate As You Want; When A Message Is Displayed - Ricoh C2408 Operating Instructions Manual

If Your Machine Does Not Operate as You
Want

When a Message is Displayed

The following chart contains explanations for the common messages. If other
messages appear, follow the instructions as they are displayed.
Problem
Cannot detect original size. Improper original is
Check original orientation.
Check paper size.
Rotate Sort is not available
with this image size.
It is over stapling capacity.
Cannot staple paper of this
size.
Duplex is not avilable with
this paper size.
Maximum number of sets
is *.

4. Troubleshooting

Cause
placed. ⇒ p.9 "Sizes diffi-
cult to detect"
Original is not placed.
There is no copy paper that
is in the same direction as
the originals.
Improper paper size is set.
A size of paper for which
Rotate Sort is not available
is selected.
The number of sheets per
set is over the staple capac-
ity.
The Staple function cannot
be used with paper size se-
lected.
A paper size not available
in Duplex mode has been
selected.
The number of copies ex-
ceeds the maximum copy
quantity.
Action
Place a custom size original on the
exposure glass. ⇒ p.13 "Placing
Originals on the Exposure Glass"
Input the horizontal and vertical
size of the custom original. ⇒ p.16
"Placing Custom Size Originals"
Do not use Auto Reduce/Enlarge
mode.
Place your originals.
Place the original in the same direc-
tion as the copy paper.
If you press the { { { { Start} } } } key, copy
will start onto the selected paper.
Select the proper paper size. ⇒ p.39
"Sort"
Check the stapler capacity. ⇒ p.108
"Supplementary Informations"
Select a paper size that can be used
in Staple mode. ⇒ p.108 "Supple-
mentary Informations"
Select the proper paper size.
You can change the maximum copy
quantity. ⇒ p.99 "Max. Copy Quan-
tity"
85