Turning On The Power; Turning On The Main Power - Ricoh C2408 Operating Instructions Manual

Laser printers
Table of Contents

Advertisement

Basics

Turning On the Power

This machine has two power switch-
es.
❖ ❖ ❖ ❖ Operation switch (right side of the
control panel)
2
Press this switch to activate the
machine. When the machine has
warmed up, you can make copies.
❖ ❖ ❖ ❖ Main power switch (left side of the ma-
chine)
When the machine is not to be used
for an extended period of time,
turn off the main power switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. See p.79 "Auto Off
Timer" and p.79 "Energy Saver
Timer".
32

Turning On the Main Power

A A A A
Make sure that the power cord is
firmly plugged into the wall out-
let.
B B B B
Open the switch cover and turn
on the main power switch (make
sure that the Main Power indica-
tor goes on).
Important
❒ Do not switch off the main pow-
er immediately after it has been
switched on. Failure to observe
this may result in damage to the
hard disk or memory, leading to
ZGJS090N
malfunctions.
Turning On the Power
A A A A
Press the operation switch to
make the On indicator go on.
Note
❒ If the power is not turned on
when the operation switch is
pressed, check if the main pow-
er switch is on. If off, turn it on.
ZGJS070N

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents