Connecting The Machine; Requirements - Ricoh C2408 Operating Instructions Manual

Getting Started

Connecting the Machine

This section gives instructions for connecting the machine and computer using
the parallel port.
1
Reference
For Ethernet and IEEE 1394 interface connections, see "Connecting to the Ma-
chine (Network Connections)", General Settings Guide.

Requirements

Before using this machine, make sure that all the environmental and electrical
requirements have been met. Connect the machine to the host computer using
the parallel port, network interface unit, or both.
Make sure that all the cables, connectors, and electrical outlets necessary to at-
tach the machine to the host computer or network are present.
Parallel cable requirements
Connect the machine to the host computer using a parallel port. This machine
does not provide the parallel cable to connect the machine to the host computer.
The machine's parallel interface is a standard bidirectional interface. It requires
a standard IEEE 1284 compliant 36-pin parallel cable and a parallel port on the
host computer. Make sure to purchase the appropriate cable for the machine and
your computer.
Note
❒ Do not use a parallel cable that is longer than 3 meters (10 feet).
12