Selecting Original Type Setting - Ricoh C2408 Operating Instructions Manual

Copying
Selecting Original Type
Setting
Select one of the following 6 types to
match your originals:
❖ ❖ ❖ ❖ Text
2
Select this mode when your origi-
nals contain only text (no pictures).
❖ ❖ ❖ ❖ Text/Photo
Select Text/Photo when your orig-
inals contain photographs or pic-
tures with text.
❖ ❖ ❖ ❖ Photo
Delicate tones of photographs and
pictures can be reproduced with
this mode.
Note
❒ If you select "Text/Photo" or
"Photo" as the original type, se-
lect the photo type from among
the three options below:
• Glossy Photo
Use when copying devel-
oped photographs.
• Printed Photo
Use when copying photo-
graphs or pictures that are
printed on paper (e.g. maga-
zines).
• Copied Photo
Use when copying copies or
originals generated by print-
ers.
❖ ❖ ❖ ❖ Map
Scanning with settings suitable for
Map originals. "Others" is dis-
played when "Original Type Dis-
play" (copy/document server box
initial settings) has been set to
"Display".
30
❖ ❖ ❖ ❖ Pale
Select this mode for originals that
have lighter lines written in pencil,
or for faint copied slips. The faint
lines will be clearly copied.
❖ ❖ ❖ ❖ Generation Copy
If your originals are copies (gener-
ation copies), the copy image can
be reproduced sharply and clearly.
Reference
⇒ p.9 "Sizes difficult to detect"
A A A A
Press the appropriate key to select
the original type.
When the original type keys are
not displayed
A Press [Original Type].
B Select the original type, and
then press [OK].