CYLINDER HEAD/VALVE
VAL VE GUIDE REPLACEMENT
Heat the cylinder head to 100°C (212°F).
CAUTION
Do not use a torch to heat the cylinder;
it may cause warping.
To avoid burns, wear heavy gloves when
handling the heated cylinder head.
Support the cylinder head and drive the old guide
out from the combustion chamber side of the
cylinder head.
CAUTION
When driving the valve guide out, be careful!
not to damage the head.
Adjust the tool setting depth by a pair of vernier
calipers.
DEPTH: 11.5 mm (0.45 in)
Reheat the cylinder head to 100°C (212°F). Sup-
port the cylinder head and drive new guides in from
the rocker arm side of the cylinder head.
9-14
~HONDA
~V'30MAGNA
VALVE GUIDE DRIVER
07942-MA60000
~
r)}k~
?r:=:=-' . ' ' . ' ' . '
~~------~~~--~----~~~·~~'*~~;Ml--~~~~, ~~;;~~~~
!
VALVE GUIDE DRIVER
077 43-0020000
/
Date of Issue: July, 1984
©
HONDA MOTOR CO., LTD,