Connecting Rod Removal - Honda V30 Magna VF500C Manual

~HONDA
~V30
MAGNA
CONNECTING ROD BIG END SIDE
CLEARANCE INSPECTION
Check the connecting rod side clearance.
SERVICE LIMIT: 0040 mm (0.016 in)
CONNECTING ROD REMOVAL
Separate the crankcase (page 10-3).
Remove the transmission.
Remove the connecting rod bearing caps and note
their locations.
Push the connecting rods and pistons out through
the top of the cylinder bores.
Mark the rods, pistons, bearings and caps as you
remove them to indicate their correct cylinder and
position on the crankpins for reassembly.
Date of Issue: July, 1984
©
HONDA MOTOR CO., LTD.
CRANKSHAFT/PISTON
CONNECTING RODS
FEELER GAUGE
BEARING CAPS
CONNECTING ROD/
PISTON ASSEMBLY
10-5