~HONDA
\~
V30 MAGNA
I nstall the clutch springs and bolts and tighten the
bolts in a crisscross pattern in 2-3 steps.
RIGHT CRANKCASE COVER
INSTALLATION
Install the starter clutch (page 7-16).
Install the starter idle gear (page 7-17).
Install a new gasket and the dowel pins.
I nstall the right crankcase cover and tighten the
bolts in a crisscross pattern.
Fill the crankcase with recommended oil (page 2-3).
I nstall the rear brake pedal and right foot peg.
Date of Issue: July, 1984
©
HONDA MOTOR CO., LTD.
CLUTCH SYSTEM
GASKET
DOWEL PIN
7-25