Flywheel Removal - Honda V30 Magna VF500C Manual

Al TERNATOR/GEARSHI FT LINKAGE
Fl YWHEEl REMOVAL
Remove the attaching bolts and slave cylinder cover.
Remove the cylinder (page 7-9).
NOTE
• It is not necessary to disconnect the clutch
oil line.
To prevent the clutch system from air con-
tamination, and the slave cylinder piston
from falling, squeeze the clutch lever im-
mediately after removing the slave cylin-
der, and tie the lever to the handle grip.
Remove the drive sprocket cover, gasket and dowel
pin.
Remove the oil pipe clamp bolt.
Place a container under the alternator cover to catch
engine oil.
Remove the alternator cover attaching bolts and
al te rnator cover.
Hold the flywheel with universal holder and remove
the flywheel bolt.
8-2
CiJ\HONDA
~V30MAGNA
SLAVE CYLINDER COVER
OIL PIPE CLAMP
UNIVERSAL HO ER 07725-0030000
OR EQUIVALENT IN U.S.A.
Date of Issue: July, 1984
© HONDA MOTOR CO., LTD.