CRANKSHAFT/PISTON
PISTON REMOVAL
Remove the piston pin clips. Push the piston pin out
and remove the piston.
Mark the piston pins to indicate their correct piston
position.
INSPECTION
II
PISTON RING
Measure the piston ring-to-groove clearance.
SERVICE LIMIT:
TOP/SECOND: 0.10 mm (0.004 in)
Remove the piston rings and mark them to indicate
the correct cylinder and piston position.
Using a piston, push the ring into the cylinder
squarely and measure the end gap.
SERVICE LIMITS:
TOP:
0.50 mm (0.020 in)
SECOND:
0.50 mm (0.020 in)
Oil (Side rail): 1.1 mm (0.04 in)
10-6
c:iiJ\
HONDA
~V30MAGNA
PISTON PIN
Date of Issue: July, 1984
©
HONDA MOTOR CO., lTD.