CLUTCH SYSTEM
Install the two dowel pins and gasket onto the left
crankcase rear cover.
Install the slave cylinder.
Connect the clutch hose with the oil bolt and the
two sealing washers.
TORQUE: 25-35 N·m (2.5-3.5 kg-m, 18-25 ft-Ib)
Fill the clutch fluid reservoir and bleed the clutch
system (page 7-4).
Install the slave cylinder cover.
RIGHT CRANKCASE COVER REMOVAL
Drain the engine oil.
Remove the rear brake pedal and right foot peg.
7-12
BRAKE PEDAL
~HONDA
~
V30 MAGNA
RIGHT FOOT PEG
Date of Issue: July, 1984
©
HONDA MOTOR CO., LTD.