Side Stand Switch - KYMCO People Service Manual

19. SWITCHES/HORN/FUEL UNIT/THERMOSTATIC SWITCH
/TEMPERATURE GAUGE/INSTRUMENTS/LIGHTS PEOPLE/PEOPLE S 250
Rubber Boot
FRONT POSITION LIGHT /HEADLIGHT
BULB REPLACEMENT
Remove the handlebar front cover. ( Ö 2-3)
Remove the position bulb socket by turning
them counterclockwise.
Remove the bulb and replace with new one.
Disconnect the headlight wire couplers.
Remove the rubber boot from the bulb socket.
Front Position Light Bulb Socket
Relax the lock clip to remove the bulb and
Lck Clip Bulb
replace with new one.
Install the bulb, aligning the bulb socket tab
with the groove and set the lock clip.
Install the rubber boot.
Install the handlebar front cover in the
reverse order of removal.
Front Position Light Bulb Sockets
TAILLIGHT LIGHT BULB EPLACEMENT
Screws
Remove the two screws attaching the rear
light shell and remove the light shell.
Remove the bulb and replace with new ones.
The installation sequence is the reverse of
removal.

SIDE STAND SWITCH

Color
Yellow/ Green Yellow/
Position
Green Black
DOWN
UP
Side Stand Switch Side Stand Switch
19-8