KYMCO People Service Manual page 44

2. EXHAUST MUFFLER/FRAME COVERS
PEOPLE/PEOPLE S 250
Screws Screws
Remove the met-in box and rear carrier. ( Ö2-
6 )
Remove the four screws attaching the floor
board.
Remove the two screws on the rear fender A.
Screws
.
Wire Couplers
Disconnect all of the wire couplers.
Remove the body cover, center cover and
rear fender A together.
FLOOR BOARD REMOVAL
Bolts
Remove the met-in box and rear carrier. ( Ö2-
6 )
Remove the body cover, center cover and
rear fender A together. ( Ö2-6 )
Remove right and left side cover. ( Ö2-6 )
Remove the four bolts on the floor board.
Remove the floor board.
2-8