Service Precautions - KYMCO People Service Manual

1. GENERAL INFORMATION

SERVICE PRECAUTIONS

„ Make sure to install new gaskets, O-rings,
circlips, cotter pins, etc. when
reassembling.
„ When tightening bolts or nuts, begin with
larger-diameter to smaller ones at several
times, and tighten to the specified torque
diagonally.
„ Use genuine parts and lubricants.
„ When servicing the motorcycle, be sure to
use special tools for removal and
installation.
„ After disassembly, clean removed parts.
Lubricate sliding surfaces with engine oil
before reassembly.
PEOPLE/PEOPLE S 250
„ Apply or add designated greases and
lubricants to the specified lubrication
points.
„ After reassembly, check all parts for proper
tightening and operation.
„ When two persons work together, pay
attention to the mutual working safety.
„ Disconnect the battery negative (-) terminal
before operation.
„ When using a spanner or other tools, make
sure not to damage the motorcycle surface.
„ After operation, check all connecting points,
fasteners, and lines for proper connection
and installation.
„ When connecting the battery, the positive
(+) terminal must be connected first.
„ After connection, apply grease to the
battery terminals.
„ Terminal caps shall be installed securely.
1-4