Side Stand - KYMCO DINK 200i Service Manual

3
. INSPECTION/ADJUSTMENT

SIDE STAND

Perform the following maintenance in
accordance with the maintenance schedule.
Functional check:
Check the spring for damage or loss of
tension and the side stand assembly for
freedom of movement.
Check the side stand ignition cut-off system:
1. Place the scooter on its center stand.
2. Put the side stand up and start the engine.
3. Lower the side stand. The engine should
stop as you put the side stand down.
If the side stand system does not operate as
described, see your KYMCO dealer for
service.
3-25
DINK 200i125