KYMCO People Service Manual page 45

2. EXHAUST MUFFLER/FRAME COVERS
FRONT UNDER COVER REMOVAL
Remove the front cover. ( Ö2-8 )
Remove the right and left side cover. ( Ö2-6 )
Remove the two screws that combine the
front under cover with the leg shield.
Remove the front under cover.
LEG SHIELD REMOVAL
Remove the front cover. ( Ö2-4 )
Remove the side cover. ( Ö2-6 )
Remover the met-in box and carrier. ( Ö2-6 )
Remove the body cover, center cover and
rear fender A together. ( Ö2-6 )
Remove the floor board. ( Ö2-7 )
Remove the front under cover. ( Ö2-7 )
Remove the key molding and fuel tank cap
molding.
Remove the bolt on the leg shield.
Remove the screw on the frame that
combining the frame with the leg shield.
Remove the three screws that combine the
reserve water tank with the leg shield.
Remove the leg shield.
CENTER UNDER COVER REMOVAL
Remove the right and left side cover. ( Ö2-6 )
Remove the four bolts on the center under
cover.
2-9
PEOPLE/PEOPLE S 250
Screw
Bolt
Fuel Tank Cap Molding
Screw
Bolts
Screw
Key Molding
Screws