KYMCO People Service Manual page 109

8. DRIVE AND DRIVEN PULLEYS/
V-BELT
Pull out the guide roller pins and guide rollers.
Remove the movable driven face from the
driven face.
Remove the oil seal from the movable driven
face.
INSPECTION
Measure the driven face spring free length.
Service Limit: 130.5mm replace if below
Check the driven face assembly for wear or
damage.
Measure the driven face O.D.
Service Limit: 39.85mm replace if below
8-9
PEOPLE/PEOPLE S 250
Movable Driven Face
Guide Roller Pin
Guide Roller
O-ring
Oil Seal