KYMCO People Service Manual page 112

8. DRIVE AND DRIVEN PULLEYS/
V-BELT
PEOPLE/PEOPLE S 250
CLUTCH ASSEMBLY
Circlips
Install the damper rubbers on the drive plate
pins.
Install the clutch weights/shoes and clutch
springs onto the drive plate.
Install the retainer plate and secure with the
circlips.
Drive Plate
Movable Driven Face
CLUTCH/DRIVEN PULLEY ASSEMBLY
Clean the pulley faces and remove any
grease from them.
Apply grease to the O-rings and install them
onto the moveable driven face.
8-12