10. A.C. GENERATOR/STARTER CLUTCH
Remove the two oil pump bolts to remove
the oil pump.
INSPECTION
Inspect the starter driven gear for wear or
damage.
Measure the starter driven gear I.D. and
O.D.
Service Limits:
I.D. : 22.15mm replace if over
O.D. : 41.50mm replace if below
Inspect the starter idle gear and shaft for
wear or damage.
Inspect the starter one-way clutch for wear
or damage.
Bolts
Oil Pump
Starter Driven Gear
Starter Idle Gear
Starter One-way Clutch
PEOPLE/PEOPLE S 250
Shaft
10-6