KYMCO People Service Manual page 105

8. DRIVE AND DRIVEN PULLEYS/
V-BELT
MOVABLE DRIVE FACE ASSEMBLY
Remove the pulley face, clutch outer, driven
pulley and belt. ( Ö 8-4))
Remove the movable drive face assembly.
Remove the drive pulley collar.
DISASSEMBLY
Remove the ramp plate.
Remove the weight rollers.
INSPECTION
Check each weight roller for wear or damage.
Measure each weight roller O.D.
Service Limit: 22.00mm replace if below
8-5
PEOPLE/PEOPLE S 250
Movable Drive Face Assembly
Ramp Plate
Drive Pulley Collar
Weight Roller