KYMCO People Service Manual page 155

12. COOLING SYSTEM
WATER PUMP/IMPELLER
INSTALLATION
When the mechanical seal is replaced, a
new seal washer must be installed to the
impeller.
Install the impeller onto the water pump
shaft.
Torque: 9.8 13.7N-m
The impeller has left hand threads.
Install the two dowel pins and a new gasket.
Install the water pump cover and tighten the
4 bolts.
Torque: 7.8 11.8N-m
12-13
PEOPLE/PEOPLE S 250
Impeller
Seal Washer (Porcelain)
Impeller (Left Hand Threads)
Dowel Pins
Water Pump Cover
Mechanical Seal
Bolts