KYMCO People Service Manual page 204

15. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER
ASSEMBLY
Clean all removed parts.
Apply silicon grease to the piston and oil seal.
Lubricate the brake caliper cylinder inside
wall with brake fluid.
Install the brake caliper piston with grooved
side facing out.
Install the piston with its outer end
protruding 3 5mm beyond the brake
caliper.
Install the two spring plate into the groove of
the caliper.
Make sure the spring plate next to the
brake pad dowel pin orientation.
Install the two brake pads and brake pad
dowel pin.
15-5
PEOPLE/PEOPLE S 250
Spring Plate
Caliper Inside
Longer
Shorter
Caliper Outside
Dowel Pin
Brake Pads