KYMCO People Service Manual page 43

2. EXHAUST MUFFLER/FRAME COVERS
RIGHT/LEFT SIDE COVER REMOVAL
Remove the screw combine right (left) side
cover with front under cover.
Remove the screw combine right (left) side
cover with the floor board.
Remove the right (left) side cover.
MET-IN BOX AND REAR CARRIER
REMOVAL
Open the seat with key.
Remove two bolts and two nuts on the met-in
box.
Disconnect all of the wire couplers.
Remove met-in box.
Remove three bolts and remove the rear
carrier.
BODY COVER/CENTER COVER/REAR
FENDER A REMOVAL
Remove six screws on air cleaner cover.
Loosen band to remove air cleaner cover and
disconnect air duct hose.
2-7
PEOPLE/PEOPLE S 250
Screws
Bolts
Nuts
Wire Couplers
Screws
Air Duct Hose
Band
Bolts