11. CRANKCASE/CRANKSHAFT
Measure the crankshaft runout.
Service Limit: 0.10mm replace if over
Measure the crankshaft bearing play.
Service Limits:
Axial : 0.20mm replace if over
Radial : 0.05mm replace if over
CRANKCASE ASSEMBLY
Clean off all gasket material from the
crankcase mating surfaces.
x Avoid damaging the crankcase mating
surfaces.
Install a new oil seal into the left crankcase.
11-5
PEOPLE/PEOPLE S 250
Play
Axial
Left Crankcase
Oil Seal
Play
Radial