Backup/Restoration Using Service Mode
Data can be backed up and restored by using the service mode backup function.
The backup data is stored in the Flash PCB.
Target Data
• Data of the DC Controller (DC-CON) PCB SRAM
• Setting data of the Reader Controller (R-CON)
Operation Procedure
■ Backup Procedure
1. Enter service mode level 2.
2. Select any of the following service mode items, and press [OK].
To backup the DC Controller PCB SRAM data:
• (LEVEL 2) COPIER > FUNCTION > SYSTEM > DSRAMBUP
To backup the Reader Controller settings data:
• (LEVEL 2) COPIER > FUNCTION > SYSTEM > RSRAMBUP
■ Restoration Procedure
1. Enter service mode level 2.
2. Select any of the following service mode items, and press [OK].
To restore the DC Controller PCB SRAM data
• (LEVEL 2) COPIER > FUNCTION > SYSTEM > DSRAMRES
To restore the Reader Controller settings data
• (LEVEL 2) COPIER > FUNCTION > SYSTEM > RSRAMRES
118
7. Backup/Restoration