To Store Non-Standard Size (Custom Size) - Konica Minolta bizhub 500 User Manual

Copy operations

Hide thumbs Also See for bizhub 500:

Table of Contents

Touch [OK] three times.

The Basic Screen will be restored with the specified paper size dis-

played on the Paper key.

Be sure to load paper of specified size in the tray, otherwise paper mis-

feed may be caused.

To store non-standard size (Custom Size)

Follow the procedure below to store up to five non-standard paper sizes.

This function allows you to quickly select the non-standard size that is often

used, dispensing with the size entry for each time.

0 Specify the dimensions of non-standard paper.

Available range for each is as follows.

Side X: 5-13/16 - 17 inch

Side X: 3-5/8 - 11-11/16 inch

0 To recall the stored non-standard size, see "To specify/recall non-stand-

ard size (Custom Size)" on page 3-22.

Touch [Paper] on the Basic Screen.

The Paper Screen will be displayed.

Basic Copy Operations

bizhub 500/420