To Make Single-Sided Copies From Double-Sided Original - Konica Minolta bizhub 500 User Manual

Basic Copy Operations

To make single-sided copies from double-sided original

Follow the procedure below to make single-sided copies from double-sided
original using the ADF.
When using the original glass to scan the double-sided original, select 1%1
mode.
0 Specify the Original Direction according to the orientation of the original
loaded in the ADF. For details, see "Specifying Orientation of Original
(Original Direction)" on page 4-12.
0 The desired copy result may not be obtained from the following types of
double-sided original unless the original page margin is specified manu-
ally.
8-1/2 × 11 or smaller portrait-type original with top margin created
8-1/2 × 11 or smaller landscape-type original with right/left margin creat-
ed
8-1/2 × 14 or larger portrait-type original with right/left margin created
8-1/2 × 14 or larger landscape-type original with top margin created.
1
Position the original in the ADF.
bizhub 500/420
3
3-55