Utility <Administrator Setting>
–
Touch [OK], to display the Confirmation Screen.
Touch [Yes].
To cancel the change, touch [No].
5
Touch [Clear Counter] to clear the counter.
–
The Confirmation Screen will be displayed.
–
Touch [Yes] to clear the counter.
To cancel the clearance, touch [No].
15.2.209 Reset Setting > 1 System Auto Reset
The machine can be set to automatically switch to the specified priority
mode (Copy or Scan) after a certain period of machine inactivity.
This function is referred to as System Auto Reset.
Use this setting to specify the priority mode and period of time to be elapsed
before the touch panel displays the priority mode screen.
According to the factory default, the machine will switch to the Copy mode
with Basic Screen displayed after one minute of machine inactivity.
To specify System Auto Reset
1
Follow the procedure on page 15-2 to display the Administrator Setting
Screen.
bizhub 500/420
15
15-69