6
5
Select Sort or Group, and set Offset to use offset output.
–
To set Sort mode, touch [Sort] to highlight it.
–
To set Group mode, touch [Group] to highlight it.
–
To set Sort in alternating crisscross pattern, touch [Sort] and [Off-
set] to highlight them.
–
To set Group in alternating crisscross pattern, touch [Group] and
[Offset] to highlight them.
6
Select the desired output tray.
–
Touch [Tray 1] or [Tray 2] to highlight it.
7
Touch [OK].
The Basic Screen will be restored.
8
Specify any necessary copy settings.
–
Auto Paper Select may be released automatically depending on the
setting you made.
When using Sort or Group in alternating crisscross pattern, make
sure that other copy conditions do not conflict with Auto Paper Se-
lect.
9
Press [Start].
The scan/print job will start.
6-24
Finishing/Folding
bizhub 500/420