Konica Minolta bizhub 500 User Manual page 269

Application Functions
? Do you want to delete the dimensions once entered?
% Press [C] (Clear) on the control panel, then enter the correct dimen-
sions.
What if the value just entered is out of available range?
?
% The Input Error message will be displayed. Press [C] (Clear) on the
control panel, then reenter the correct value.
8
Touch [2/4/8 Repeat] on the Image Repeat Screen.
The 2/4/8 Repeat Screen will be displayed.
9
Specify the number of repeats.
– Touch [2 Repeat], [4 Repeat], or [8 Repeat] to highlight it.
– Select [2 Repeat] to repeat the original image twice on a printed
page.
To adjust the interval between two images, touch [Repeat Interval
Setting]. Proceed to the next step.
– Select [4 Repeat] to repeat the original image four times on a print-
ed page. Proceed to step 11.
– Select [8 Repeat] to repeat the original image eight times on a print-
ed page. Proceed to step 11.
bizhub 500/420
5
5-53