Setting Repeat Times Automatically; To Automatically Set The Repeat Times - Konica Minolta bizhub 500 User Manual

Application Functions
5.8.1

Setting Repeat Times Automatically

Select the Auto Detect or Set Range mode to automatically detect or manu-
ally specify the original image size, then let the machine determine the
number of repeats from specified mode and magnification ratio.

To automatically set the repeat times

0 Scan the original from original glass. The ADF cannot be used to scan the
original.
0 Auto Detect mode uses Non-Image Area Erase function to automatically
detect the original size. Keep the ADF open.
0 Set Range mode does not use Non-Image Area Erase function. Close the
ADF.
0 Use Set Range mode to repeat a part of the original, not the entire image,
by specifying the scanning area.
Select the standard size or enter the dimensions of custom size.
Available dimensions: 2 to 17 in. for side X, 2 to 11-11/16 in. for side Y
0 Select With Margin to leave the marginal area blank without printing de-
fective images. Or, select Without Margin to print the defective images
around the edges.
0 Tray 1 will be automatically selected as copy paper tray source.
Change the tray selection manually, if desired. Auto Paper Select will not
function.
0 Auto Zoom will not function. Specify the desired magnification ratio.
1
Position the original on the original glass.
– Keep the ADF open.
2
Enter the desired print quantity from the control panel keypad.
3
Load the desired copy paper into any tray.
bizhub 500/420
5
5-45