15
15.2.105 Weekly Timer Setting>4 Select Time for Power Save
The Weekly Timer function turns the machine on and off once a day. Use Se-
lect Time for Power Save to shut down the power and then turn it on again
while the machine is turned on according to the Weekly Timer setting. Only
one off-time interval can be programmed.
The factory default of this setting is OFF.
To specify Select Time for Power Save
1
Follow the procedure on page 15-2 to display the Administrator Setting
Screen.
2
Touch [1 System Setting], [5 Weekly Timer Setting], and then [4 Select
Time for Power Save].
The Select Time for Power Save Screen will be displayed.
15-44
Utility <Administrator Setting>
bizhub 500/420