5
7
Touch [Complete Scan] on the Basic Screen.
8
Press [Start].
The machine will start printing when ready for output.
Note
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Application
Screen or Basic Screen.
5.15.7 Storing Image on HDD / Overlaying Stored Image (Store
Overlay)
To make a copy using the image previously stored, start with step 9.
To copy using Store Overlay
1
Position the overlaying original.
Position the original FACE up in the document feeder or FACE DOWN
on the original glass.
5-110
Application Functions
bizhub 500/420