Fax Tx Setting; Fax Tx Setting Items; Specifying The Scanning Density; Specifying The Quality Priority - Konica Minolta bizhub 306 User Manual

7.4

Fax TX setting

7.4 Fax TX setting
Configure various transmission settings for fax communication.
7.4.1

Fax TX setting items

Number
1
2
3
4
5
d
Reference
Fax TX settings can also be configured using LSU (Local Setup Utility). For details, refer to page 11-4.
Settings can also be configured using Web Connection. For details, refer to Web Connection - [Address] -
[Fax Configuration] of [User's Guide Network Administrator].
7.4.2

Specifying the scanning density

1
Press the Utility key.
2
Use the +/, key to select [FAX TX OPERATION], then press the OK key.
3
Use the +/, key to select [DENSITY LEVEL], then press the OK key.
4
Use the */) key to select the density, then press the OK key.
This returns to the fax TX settings screen.
7.4.3

Specifying the quality priority

1
Press the Utility key.
2
Use the +/, key to select [FAX TX OPERATION], then press the OK key.
3
Use the +/, key to select [QUALITY PRIORITY], then press the OK key.
4
Use the +/, key to select a target image quality, then press the OK key.
This returns to the fax TX settings screen.
bizhub 306/266
Fax TX setting
[DENSITY LEVEL]
[QUALITY PRIORITY]
[DEFAULT TX]
[HEADER]
[CONFIRM FAX NO.]
Contents
Select the default density to scan the original from five levels.
When the paper color (background color) is darker, adjust to the
light side. When a text is faint or colored, adjust to the dark side.
• The factory default is [
Specify the default image quality (resolution) to scan the original
with a combination of [STD/TEXT], [FINE/TEXT], [S-FINE/TEXT],
[STD/PHOTO], [FINE/PHOTO], and [S-FINE/PHOTO].
• The factory default is [STD/TEXT].
Select the default transmission method from [MEMORY TX] and
[ADF TX].
• The factory default is [MEMORY TX].
Tips
This setting is displayed when optional Reverse Automatic
Document Feeder DF-625 is installed.
To specify whether to add a header (transmission date and time,
sender name, sender's fax number, and other items) when
transmitting a fax, select [ON] or [OFF] as the default.
• The factory default is [ON].
Tips
This setting item may not be displayed in some regions.
When specifying a fax destination with direct input, a screen ap-
pears prompting you to enter the fax number again for confirma-
tion. Entering the fax number twice prevents one from entering
incorrect destinations. Select [ON] or [OFF] as needed.
• The factory default is [OFF].
].
7
7-21