Printing Distribution Number (Set Numbering); To Copy Using Set Numbering - Konica Minolta bizhub 500 User Manual

5
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Application
Screen or Basic Screen.

5.15.3 Printing Distribution Number (Set Numbering)

To copy using Set Numbering

0 Specify the start number. Available range for this setting is 0 ~ 9999.
The distribution number is normally printed as a four-digit number.
0 Select the desired density level from the four options.
0 Select whether to print the distribution number on the cover only or on all
pages.
0 Select the character size from 20pt or 36pt.
1
Position the original.
2
Enter the desired print quantity from the control panel keypad.
3
Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
5-100
Application Functions
bizhub 500/420