Konica Minolta bizhub 500 User Manual page 591

Utility <Administrator Setting>
3
Select whether or not to allow the use of the machine during non-busi-
ness hours.
– Touch [ON] or [OFF] in the left side area of the screen to highlight it.
4
Specify a password, if desired.
– Touch [Password] in the right side area of the screen.
The Password Creation Screen will be displayed.
– Use the control panel keypad to enter the desired password.
Up to eight digits can be entered.
5
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Weekly Timer Setting Screen will be restored.
6
If further changes are required, touch the desired key.
Note
If any password has not been specified, the temporary use of the ma-
chine will be allowed by pressing [Power Save] on the control panel and
simply touching [OK] on the Password Entry Screen.
bizhub 500/420
15
15-47