4
To specify Margin
0 Load the original in the ADF.
0 This setting functions effectively when 2%2 or 2%1 mode is specified in
Simplex/Duplex setting.
0 The Margin setting will not be cleared after a job completion until the re-
set function is activated.
The machine can be set to reset the Margin setting to the factory default
each time a single job is completed. For details, see page 15-74.
1
Load the original in the ADF.
2
Touch [Combine Originals] tab on the Basic Screen.
The Combine Originals Screen will be displayed.
3
Touch [Margin].
The Page Margin Screen will be displayed.
4-18
Combine Originals/ Original Image Type
bizhub 500/420