Finishing/Folding
For setting Margin, see "Specifying Position of Binding Margin
(Margin)" on page 4-17.
–
When completed, touch [Basic] tab to return to the Basic Screen.
4
Touch [Finishing] on the Basic Screen.
The Finishing Screen will be displayed.
5
Touch [][2-Hole] or [3-Hole] to highlight it.
–
Group and Offset are also available in combination. Touch the de-
sired key to highlight it.
–
To cancel the setting, touch the button again to deselect it.
bizhub 500/420
6
6-17