4
Note
To release Z-Folded Original, touch the highlighted key again to deselect
it, or press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touch [OK] to return to the Basic Screen.
4.2.3
Specifying Orientation of Original (Original Direction)
Specify the orientation of the original placed on the ADF or on original glass.
Without this setting, the copy results may not be obtained as expected, es-
pecially when making copies under following conditions.
- Copying from double-sided original
- Making double-sided copies
- Combine Pages
- Booklet
- Book Copy
- Staple, etc.
Function overview
Using ADF
4-12
Combine Originals/ Original Image Type
Using original
Icon
glass
Description
Select for the original positioned with
the top toward the rear of the machine.
Initially selected as factory default.
Select for the original positioned with
the top toward the front of the machine.
bizhub 500/420