Combine Originals/ Original Image Type
To specify Original Image Type
1
Position the original.
2
Touch [Orig.Image Type] tab on the Basic Screen.
The Original Image Type Screen will be displayed.
3
Select the original type according to the positioned original.
4
Touch [OK], then touch [Basic] tab.
The Basic Screen will be restored.
Note
Press [Reset] on the control panel to restore the factory default setting.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Basic
Screen.
bizhub 500/420
4
4-21