Remove Paper From Standard Output Bin - Dell S2830dn User Manual

Troubleshooting

Remove paper from standard output bin

Remove the paper stack from the standard bin.
Standard network software error [54]
Try one or more of the following:
•
From the printer control panel, press
•
Unplug the router, then wait for 30 seconds, and then plug it back again.
•
Turn off the printer, and then turn it back on.
•
Update the network firmware in the printer or the print server. For more information, visit the Dell
Support Web site at
Parallel port disabled [56]
•
From the control panel, press
Notes:
•
The printer discards any data received through the parallel port.
•
Make sure that the Parallel Buffer menu is not set to Disabled.
Standard USB port disabled [56]
Try one or more of the following:
•
From the printer control panel, press
Note: The printer discards any data received through the USB port.
•
From the printer control panel, set USB Buffer to Auto.
Too many trays attached [58]
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the extra trays.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
Unformatted flash detected [53]
Try one or more of the following:
•
From the printer control panel, press
•
Format the flash memory device.
to confirm.
http://support.dell.com
to clear the message.
to clear the message and continue printing.
to stop the defragmentation and continue printing.
contact your system support person.
111